set ipv6 next-hop
Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
[ no ] set ipv6 next-hop ipv6Address [ localAddress ]
Command introduced before JunosE Release 7.1.0.
Indicates where to send packets that pass a match clause of a route map for IPv6 policy
routing. The no version removes the set clause from a route map.
ipv6Address—IPv6 address of next hop to which you want to send packets; does not
need to be an adjacent router
localAddress—IP address of the specific interface
Route Map Configuration
Chapter 7: S Commands
499