JunosE 11.3.x Command Reference Guide N to Z
nsf interface wait
Syntax
Release Information
Description
Options
Mode
92
[ no ] nsf interface wait [ seconds ]
Command introduced before JunosE Release 7.1.0.
Specifies the maximum amount of time, in seconds, that an IS-IS process on a restarting
router waits for all interfaces with IS-IS adjacencies to come up before completing the
restart process. The no version restores the default maximum wait time, 10 seconds.
seconds—Maximum wait time, in the range 5–120 seconds, before the IS-IS restart
process is completed; default value is 10 seconds
Router Configuration
Copyright © 2010, Juniper Networks, Inc.