Path Ds1|E1 - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

path ds1|e1

Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
path pathChannel { ds1 | e1 } tributaryIdentifier [ tributaryType ]
[ no ] path pathChannel { ds1 | e1 } tributaryIdentifier [ tributaryType ]
Command introduced before JunosE Release 7.1.0.
Creates and configures SONET and SDH tributaries. The no version deletes a tributary.
pathChannel—Number, in the range 1–2147483648, that identifies the path
tributaryIdentifier—Specifier for the tributary in the format
pathChannel { ds1 | e1 } pathPayload/tributaryGroup/tributaryNumber
pathPayload—Payload number for the path; value is 1 for SONET and in the range
1–3 for SDH
tributaryGroup—Number, in the range 1–7, that identifies the group within the path
tributaryNumber—Number of the tributary within the tributary group; the value is in
the range 1–4 if the tributary type is vt15 or tu11 and in the range 1–3 if the tributary
type is tu12
tributaryType—Virtual tributary type
vt15—Default for SONET DS1 tributaries
tu11—Default for SDH DS1 tributaries
tu12—Default for SDH E1 tributaries
Controller Configuration
Chapter 4: P Commands
133