Neighbor Password - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide N to Z

neighbor password

Syntax
Release Information
Description
Options
Mode
50
neighbor { ipAddress | ipv6Address | peerGroupName } password [ 0 | 8 ] string
no neighbor { ipAddress | ipv6Address | peerGroupName } password
Command introduced before JunosE Release 7.1.0.
ipv6Address variable added in JunosE Release 8.0.0.
Enables MD5 authentication on a TCP connection between two BGP peers. The no version
disables MD5 authentication.
ipAddress—IP address of the BGP neighbor
ipv6Address—IPv6 address of BGP neighbor
peerGroupName—Name of the BGP peer group to which this neighbor belongs. If you
specify a BGP peer group by using the peerGroupName argument, all the members of
the peer group inherit the characteristic configured with this command, unless it is
overridden for a specific peer.
0—Indicates that the MD5 password is entered in unencrypted form (plaintext)
8—Indicates that the MD5 password is entered in encrypted form (ciphertext)
string—MD5 password, an alphanumeric text string of up to 16 characters
Address Family Configuration, Router Configuration
Copyright © 2010, Juniper Networks, Inc.