Table of Contents
Advertisement
JunosE 11.3.x Command Reference Guide N to Z
peak-burst
Syntax
Release Information
Description
Options
Mode
Related
Documentation
184
peak-burst size { millisecond milliseconds }
no peak-burst
Command introduced before JunosE Release 7.1.0.
milliseconds variable added in JunosE Release 8.1.0.
Sets the peak burst for a rate-limit profile. The no version restores the default value, 100
ms; if 100ms is less than 8K, then 8K (8192).
size—Size in bytes in the range 1–4294967295
milliseconds—Milliseconds in the range 1–10000
Rate Limit Profile Configuration
Creating a Two-Rate Rate-Limit Profile
Copyright © 2010, Juniper Networks, Inc.
Advertisement
Table of Contents
