Next-Interface - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide N to Z

next-interface

Syntax
Release Information
Description
Options
Mode
Related
Documentation
78
[ no ] [ suspend ] next-interface interfaceType interfaceSpecifier
[ next-hop nextHop ] [ classifier-group claclName ] [ precedence precValue ]
Command introduced before JunosE Release 7.1.0.
Defines an output interface for an IP policy list. When the interfaceType is a broadcast
medium, specify a next hop using the next-hop command. The no version removes a
next interface rule from a policy list; the suspend keyword temporarily suspends the rule;
the no suspend version resumes application of a suspended rule. For IP interfaces, this
command is supported only on input policies.
NOTE: The next-interface command has been replaced by the forward
interface command and may be removed completely in a future release.
The SRP module Fast Ethernet port cannot be the destination of the
next-interface command.
interfaceType—Interface type; see Interface Types and Specifiers on page 5
interfaceSpecifier—Particular interface; format varies according to interface type; see
Interface Types and Specifiers on page 5
nextHop—Next-hop IP address
claclName—In Policy List Configuration, specifies the classifier control list used to
classify packets for this next-hop policy. If you do not specify a classifier group, the
router selects all packets from the interface associated with this policy list for this rule.
precValue—In Policy List Configuration, specifies the precedence of this rule in relation
to other rules within this set
Classifier Group Configuration, Policy List Configuration
Policy Rule Precedence
Copyright © 2010, Juniper Networks, Inc.