Neighbor Send-Community - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide N to Z

neighbor send-community

Syntax
Release Information
Description
Options
Mode
60
[ no | default ] neighbor { ipAddress | ipv6Address | peerGroupName } send-community
[ standard | extended | both ]
Command introduced before JunosE Release 7.1.0.
ipv6Address variable added in JunosE Release 8.0.0.
Enables a BGP speaker to send a community attribute to the peer. The no version causes
the speaker to send only standard communities to the peer. The default version removes
the explicit configuration from the peer or peer group and reestablishes inheritance of
the feature configuration.
ipAddress—IP address of BGP neighbor
ipv6Address—IPv6 address of BGP neighbor
peerGroupName—Name of a BGP peer group. If you specify a BGP peer group by using
the peerGroupName argument, all the members of the peer group inherit the
characteristic configured with this command. You cannot override the characteristic
for a specific member of the peer group.
standard—Sends only standard communities
extended—Sends only extended communities
both—Sends both standard and extended communities
Address Family Configuration, Router Configuration
Copyright © 2010, Juniper Networks, Inc.