No Log Filters - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide N to Z

no log filters

Syntax
Release Information
Description
Mode
84
no log filters
Command introduced before JunosE Release 7.1.0.
Turns off all log filters. To turn off a specific filter, use the no version of the log severity
command that you used to add the filter. This command has only a no version.
Global Configuration
Copyright © 2010, Juniper Networks, Inc.