Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual page 402

JunosE 11.3.x Command Reference Guide N to Z
rd
Syntax
Release Information
Description
Options
Mode
360
rd distinguisher
Command introduced before JunosE Release 7.1.0.
Specifies the unique two-part route distinguisher for a VRF. You must specify a route
distinguisher for a VRF. Otherwise, the VRF will not operate. After you have configured
the route distinguisher, you can change it only by removing and recreating the VRF.
There is no no version.
distinguisher—Unique two-part identifier in the format number1:number2
number1—AS number or an IP address
number2—Unique integer; 32 bits if number1 is an AS number; 16 bits if number1 is an
IP address
VRF Configuration
Copyright © 2010, Juniper Networks, Inc.