Table of Contents
Advertisement
JunosE 11.3.x Command Reference Guide N to Z
rtr schedule restart-time
Syntax
Release Information
Description
Options
Mode
424
rtr schedule rtrIndex restart-time restartValue
Command introduced before JunosE Release 7.1.0.
Specifies the interval at which the RTR probe restarts, in seconds. There is no no version.
rtrIndex—Number of the operation to be configured, in the range 1–4294967295; no
default
restartValue—Interval in seconds until test restarts, in the range 0–2147483647; default
value is 0, which specifies no restart after the test finishes
Global Configuration
Copyright © 2010, Juniper Networks, Inc.
Advertisement
Table of Contents
