Neighbor Soft-Reconfiguration Inbound - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

neighbor soft-reconfiguration inbound

Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
[ no | default ] neighbor { ipAddress | ipv6Address | peerGroupName }
soft-reconfiguration inbound
Command introduced before JunosE Release 7.1.0.
ipv6Address variable added in JunosE Release 8.0.0.
Initiates storage of unmodified copies of routes from the specified neighbor or all members
of the specified peer group. The no version halts this storage. The default version removes
the explicit configuration from the peer or peer group and reestablishes inheritance of
the feature configuration.
ipAddress—IP address of BGP neighbor
ipv6Address—IPv6 address of BGP neighbor
peerGroupName—Name of a BGP peer group. If you specify a BGP peer group by using
the peerGroupName argument, all the members of the peer group inherit the
characteristic configured with this command, unless it is overridden for a specific peer.
Address Family Configuration, Router Configuration
Chapter 2: N Commands
65