Show Icr-Partition - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide N to Z

show icr-partition

Syntax
Release Information
Description
Options
Mode
Related
Documentation
698
show icr-partition [ interfaceType interfaceSpecifier [ vrid ] ] [ filter ]
Command introduced in JunosE Release 10.3.0.
Displays ICR partition information for the VRID configured on the specified interface.
interfaceType—One of the following interface types listed in Interface Types and
Specifiers on page 5
fastEthernet
gigabitEthernet
tenGigabitEthernet
interfaceSpecifier—Particular interface; format varies according to interface type; see
Interface Types and Specifiers on page 5
vrid—Virtual router ID identifier; a number in the range 1– 255
filter—See Filtering show Commands on page 4
Privileged Exec
Monitoring the Configuration of an ICR Partition Attached to an Interface
Monitoring the Status of ICR Partition Accounting
Monitoring the Configuration of ICR Partitions
Copyright © 2010, Juniper Networks, Inc.