Pppoe Profile - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide N to Z

pppoe profile

Syntax
Release Information
Description
Options
Mode
252
[ no ] pppoe profile [ bridgedEthernet | ip | ppp | pppoe | any ] profileName
Command introduced before JunosE Release 7.1.0.
Assigns a profile to a static PPPoE major interface. The profile configuration is used to
dynamically configure an upper bridged Ethernet, IP, PPP, and/or PPPoE interface. The
no version removes the profile assignment from the interface.
bridgedEthernet—Specifies a bridged Ethernet encapsulation type to which the profile
applies
ip—Specifies an IP encapsulation type to which the profile applies
ppp—Specifies a PPP encapsulation type to which the profile applies
pppoe—Specifies a PPPoE encapsulation type to which the profile applies
any—Specifies any autoconfigured encapsulation that does not have a specific profile
assignment
profileName—Profile name of up to 80 characters
Interface Configuration, Subinterface Configuration
Copyright © 2010, Juniper Networks, Inc.