Set Local-Preference - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

set local-preference

Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
set local-preference value
no set local-preference
Command introduced before JunosE Release 7.1.0.
Specifies a preference value for the AS path. The no version removes the set clause from
a route map.
value—Preference number, in the range 0–4294967295
Route Map Configuration
Chapter 7: S Commands
501