Show Bgp Ipv6 Community - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

show bgp ipv6 community

Syntax
Release Information
Description
Options
Copyright © 2010, Juniper Networks, Inc.
show bgp ipv6
[ unicast | multicast | vpnv6 all | vpnv6 vrf vrfName | route-target signaling ] community
{ communityNumber | local-as | no-advertise | no-export }
[ communityNumber | local-as | no-advertise | no-export ]*
[ exact-match ] [ fields { fieldOptions } ] [ filter ]
Command introduced before JunosE Release 7.1.0.
route-target signaling keywords added in JunosE Release 8.2.0.
Displays routes that belong to the specified BGP community.
unicast—Specifies the IPv6 unicast address family and routing table; the default option
multicast—Specifies the IPv6 multicast address family and routing table
vpnv6 all—Specifies the VPN-IPv6 address family and all IPv6 VPN routing and
forwarding instances
vpn6 vrf vrfName—Specifies the VPN-IPv6 address family and only the IPv6 VPN
routing and forwarding instance with the name vrfName
route-target signaling—Specifies the route-target address family
communityNumber—Filters routes according to this community number, specified
either as a number in the range 1–4294967295 or in AA:NN format (autonomous system
number:community number); displays only routes that are members of the specified
community
local-as—Displays only routes belonging to the local AS community
no-advertise—Displays only routes belonging to the no-advertise community
no-export—Displays only routes belonging to the no-export community
*—Indicates that one or more parameters can be repeated multiple times in a list in
the command line
exact-match—Displays only routes that have exactly the specified communities
fields—Displays only the specified fields; the display order of the fields is hard-coded
and not affected by the order in which you enter them
fieldOptions—Fields to be displayed, in the format
all | [ afi | aggregator | as-path | atomic-aggregate | best | clusters | communities |
extended-communities | imported | intro | in-label | loc-pref | med | next-hop |
next-hop-cost | origin | originator-id | out-label | peer | peer-type | rd | safi | stale |
unknown-types | weight ]*
all—All available information; not recommended, because this information for each
network does not fit on a single line and is difficult to read
afi—Address family identifier
aggregator—AS number and IP address of aggregator
Chapter 7: S Commands
575