Table of Contents
Advertisement
ppp keepalive
Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
ppp keepalive [ seconds ]
no ppp keepalive
Command introduced before JunosE Release 7.1.0.
Specifies a keepalive value. The keepalive mechanism tracks the status of the connection.
To restore the default of 30 seconds, enter ppp keepalive without a value. High-density
mode is automatically selected when PPP is layered over ATM, tunnel, or PPPoE.
Low-density mode is selected when PPP is layered over HDLC. The no version disables
keepalive.
seconds—Keepalive timeout period, in the range 30–64800 seconds for high-density
mode, 1–64800 seconds for POS uplink interfaces in low-density mode, or 10–64800
seconds for all other HDLC interfaces in low-density mode; default value is 30 seconds
Interface Configuration, Profile Configuration, Subinterface Configuration
Chapter 4: P Commands
223
Advertisement
Table of Contents
