JunosE 11.3.x Command Reference Guide N to Z
path ds3 t1 description
Syntax
Release Information
Description
Options
Mode
166
[ no ] path pathChannel ds3 ds3Channel t1 t1Channel [ /subchannel ] description name
Command introduced before JunosE Release 7.1.0.
Assigns a text description or an alias to a T1 channel group or subchannel on a DS3 signal.
This command applies to a T1 channel group or subchannel on a DS3 over channelized
SONET/SDH interface. Use the show controllers sonet command to display the text
description. The no version removes the description or alias.
pathChannel—Number, in the range 1–2147483648, that identifies the path
ds3Channel—Number, in the range 1–3, that identifies the DS3 channel
t1Channel—One or more individual T1 channels, ranges of T1 channels, or combination
of individual channels and ranges, in the range 1–28 (no spaces); for example,
3,7-15,19-13,27
subchannel—Fractional T1 interface in the range 1–24
name—Text string or alias of up to 80 characters for the T1 channel group or subchannel
on a T3 over channelized SONET/SDH interface
Controller Configuration
Copyright © 2010, Juniper Networks, Inc.
Need help?
Do you have a question about the JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 and is the answer not in the manual?