Set Dhcp Vendor-Option - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide N to Z

set dhcp vendor-option

Syntax
Release Information
Description
Options
Mode
492
To set the default action to take when the option 60 string does not match a configured
vendor-option string:
[ no ] set dhcp vendor-option default [ drop | local-server | proxy-client |
relay address | relay-server-list ]
To set the action to take when the option 60 string matches a configured vendor-option
string:
[ no ] set dhcp vendor-option { equals | starts-with } string [ local-server | relay address
]
Command introduced in JunosE Release 8.2.0.
Configures vendor-option strings that control DHCP client traffic. Creates DHCP
vendor-option servers by configuring DHCP relay to match DHCP option 60 strings and
to specify the action the router takes when it receives DHCP option 60 strings. The no
version disables the setting.
drop—Discards packets
local-server—Forwards packets to the DHCP local server
proxy-client—Forwards packets to the DHCP proxy client server
address—IP address of the vendor-option server to which packets are forwarded
relay-server-list—Forwards packets to all non-vendor option DHCP servers. The
relay-server-list consists of all non-vendor option servers. Non-vendor option servers
are those servers that are configured with the set dhcp relay command but not with
the set dhcp vendor-option command.
equals—Configures a string that must be matched exactly for option 60 processing
starts-with—Configures the string that is matched from left-to-right for option 60
processing
string—Option 60 string to match; up to 254 hexadecimal characters
Global Configuration
Copyright © 2010, Juniper Networks, Inc.