Radius Include - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide N to Z

radius include

Syntax
Release Information
Description
Options
324
radius include attributeName
{ access-request | acct-on | acct-off | acct-start | acct-stop } { enable | disable }
no radius include attributeName
{ access-request | acct-on | acct-off | acct-start | acct-stop }
Command introduced before JunosE Release 7.1.0.
l2c-access-loop-parameters attribute added in JunosE Release 7.2.0.
l2cd attributes added in JunosE Release 9.0.0.
framed-interface-id and framed-ipv6-prefix attributes, and acct-stop support for
framed-ip-addr attribute added in JunosE Release 9.0.0.
downstream-calculated-qos-rate and upstream-calculated-qos-rate attributes added
in JunosE Release 9.1.0.
ipv6-accounting, delegated-ipv6-prefix, framed-ipv6-pool, framed-ipv6-route,
ipv6-local-interface, ipv6-nd-ra-prefix, ipv6-primary-dns, ipv6-secondary-dns, and
ipv6-virtual-router attributes added in JunosE Release 10.2.0.
icr-partition-id attribute added in JunosE Release 10.3.0.
framed-route attribute added in JunosE Release 11.3.0.
Configures the inclusion of RADIUS attributes in RADIUS messages. Not all attributes
are available in all message types. The listed attributes are included by default except
where noted. The no version restores the default.
attributeName—One of the following RADIUS attributes; not all attributes are available
in all message types.
Attributes available for Access-Request, Acct-Start, and Acct-Stop messages:
acct-multi-session-id—Includes RADIUS attribute 50, Acct-Multi-Session-Id
acct-tunnel-connection—Includes RADIUS attribute 68, Acct-Tunnel-Connection
ascend-num-in-multilink—Includes RADIUS attribute 188, Ascend-Num-In-Multilink
called-station-id—Includes RADIUS attribute 30, Called-Station-Id
calling-station-id—Includes RADIUS attribute 31, Calling-Station-Id
connect-info—Includes RADIUS attribute 77, Connect-Info
dhcp-options—Includes RADIUS attribute 26-55, DHCP-Options
dhcp-option-82—Includes RADIUS attribute 26–159, DHCP-Option 82
dhcp-gi-address—Includes RADIUS attribute 26-57, DHCP-GI-Address
dhcp-mac-address—Includes RADIUS attribute 26-56, DHCP-MAC Address
downstream-calculated-qos-rate—Includes RADIUS attribute 26-141,
Downstream-Calculated-Qos-Rate
Copyright © 2010, Juniper Networks, Inc.