JunosE 11.3.x Command Reference Guide N to Z
path ds1|e1 shutdown
Syntax
Release Information
Description
Options
Mode
144
[ no ] path pathChannel { ds1 | e1 } tributaryIdentifier shutdown
Command introduced before JunosE Release 7.1.0.
Disables DS1 or E1 over channelized SONET and SDH interfaces. DS1 and E1 interfaces
are enabled by default. The no version restarts a disabled interface.
pathChannel—Number, in the range 1–2147483648, that identifies the path
tributaryIdentifier—Specifier for the tributary in the format
pathChannel { ds1 | e1 } pathPayload/tributaryGroup/tributaryNumber
pathPayload—Payload number for the path; value is 1 for SONET and in the range
1–3 for SDH
tributaryGroup—Number, in the range 1–7, that identifies the group within the path
tributaryNumber—Number of the tributary within the tributary group; the value is in
the range 1–4 if the tributary type is vt15 or tu11 and in the range 1–3 if the tributary
type is tu12
Controller Configuration
Copyright © 2010, Juniper Networks, Inc.