Show Ip Bgp Neighbors Received Prefix-Filter - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide N to Z

show ip bgp neighbors received prefix-filter

Syntax
Release Information
Description
Options
Mode
742
show ip bgp [ ipv4 unicast | ipv4 multicast | vpnv4 all | vpnv4 vrf vrfName ]
neighbors { ipAddress | ipv6Address } received prefix-filter [ filter ]
Command introduced before JunosE Release 7.1.0.
ipv6Address variable added in JunosE Release 8.0.0.
Displays prefix-list outbound route filters received from the neighbor.
ipv4 unicast—Specifies the IPv4 unicast address family and routing table; the default
option
ipv4 multicast—Specifies the IPv4 multicast address family and routing table
vpnv4 all—Specifies the IPv4 VPN address family and all IPv4 VPN routing and
forwarding instances
vpvn4 vrf vrfName—Specifies the IPv4 VPN address family and only the IPv4 VPN
routing and forwarding instance with the name vrfName
ipAddress—IP address of a neighbor whose routes the router has learned
ipv6Address—IPv6 address of a neighbor whose routes the router has learned
filter—See Filtering show Commands on page 4
Privileged Exec, User Exec
Copyright © 2010, Juniper Networks, Inc.