Table of Contents
Advertisement
JunosE 11.3.x Command Reference Guide N to Z
ppp authentication
Syntax
Release Information
Description
Options
Mode
212
ppp authentication [ virtual-router vrName ] { authProtocol }
no ppp authentication
Command introduced before JunosE Release 7.1.0.
eap keyword added in JunosE Release 7.3.0.
Requests authentication from a PPP peer router. The no version removes the
authentication requirement.
vrName—Name of a virtual router to be used as the authentication virtual router
authProtocol—One or more of the following protocols, in order of preference; if the
peer router refuses to negotiate the first choice, then the local router requests the next
specified protocol, and so on; if the peer router refuses to negotiate authentication,
the local router terminates the session
eap—Specifies EAP authentication protocol
chap—Specifies CHAP authentication protocol
pap—Specifies PAP authentication protocol
Interface Configuration, Profile Configuration, Subinterface Configuration
Copyright © 2010, Juniper Networks, Inc.
Advertisement
Table of Contents
