Show Mpls Forwarding - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide N to Z

show mpls forwarding

Syntax
Release Information
Description
Options
Mode
Related
Documentation
1014
show mpls forwarding
[ interface interfaceType interfaceSpecifier ] [ bgp | ldp | rsvp-te ]
[ label { atm vpi vci | labelNumber [ labelRangeEnd ] } ]
[ brief | bindings | bindings delta | delta ] [ filter ]
Command introduced before JunosE Release 7.1.0.
Displays the MPLS forwarding table.
interfaceType—Interface type; see Interface Types and Specifiers on page 5
interfaceSpecifier—Particular interface; format varies according to interface type; see
Interface Types and Specifiers on page 5
bgp—Displays BGP-specific forwarding information
ldp—Displays LDP-specific forwarding information
rsvp-te—Displays RSVP-TE–specific forwarding information
atm—Displays information for the specified ATM VPI/VCI labels
vpi—Specifies ATM VPI that partially designates a label
vci—Specifies ATM VCI that partially designates a label
labelNumber—Label number, in the range 16–1048575
labelRangeEnd—Number, in the range 16–1048575, that specifies the high end of a
range of labels
brief—Displays only brief or summary information about the tunnels
bindings—Displays protocol-specific label-to-FEC bindings
detail—Displays detailed information
filter—See Filtering show Commands on page 4
Privileged Exec, User Exec
Monitoring LDP-Related Settings for VPLS, Monitoring MPLS Forwarding for Layer 2
Services over MPLS, and Monitoring MPLS Forwarding State for L2VPN (VPWS) Instances
in the JunosE BGP and MPLS Configuration Guide
Copyright © 2010, Juniper Networks, Inc.