Next-Address - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide N to Z

next-address

Syntax
Release Information
Description
Options
Mode
76
next-address ipAddress [ [ mask ] ipMask ] [ loose ]
Command introduced before JunosE Release 7.1.0.
Configures an IPv4 hop at the end of the MPLS explicit path. There is no no version.
ipAddress—Address of the node
ipMask—[not currently used] Mask for the next adjacent address
loose—Indicates that the node is not necessarily directly connected (adjacent) to the
previous node in the path. If loose is not configured, the configuration defaults to strict.
Strict indicates that the node is directly connected to the previous node.
Explicit Path Configuration
Copyright © 2010, Juniper Networks, Inc.