Show Ip Pim Interface - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

show ip pim interface

Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
show ip pim interface { summary | [ interfaceType interfaceSpecifier ] [ count ]
[ filter ] }
Command introduced before JunosE Release 7.1.0.
Displays information about each PIM dense mode interface.
summary—Displays the number of configured, enabled, and disabled PIM dense mode,
PIM sparse mode, and PIM sparse-dense mode interfaces
interfaceType—Interface type; see Interface Types and Specifiers on page 5
interfaceSpecifier—Particular interface; format varies according to interface type; see
Interface Types and Specifiers on page 5
count—Displays the number of incoming and outgoing PIM control packets
filter—See Filtering show Commands on page 4
Privileged Exec, User Exec
Chapter 7: S Commands
845