Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual page 58

JunosE 11.3.x Command Reference Guide N to Z
16
Table 4: Interface Types and Specifiers for E120 Router and E320
Router (continued)
Interface Type Description
pos Packet over
SONET
(POS)
interface
sonet – line layer Line layer of
a
SONET/SDH
interface
sonet – path layer Path layer of
a
SONET/SDH
interface
Interface Specifier
slot/adapter/port
slot—Number of the chassis slot in the range
0–5 (E120 router) and 0–5 or 11–16 (E320
router)
adapter—Identifier for the IOA within the
chassis slot, either 0 or 1, where:
0 indicates that the IOA is installed in the
right IOA bay (E120 router) or the upper IOA
bay (E320 router).
1 indicates that the IOA is installed in the
left IOA bay (E120 router) or the lower IOA
bay (E320 router).
port—Port number on the IOA
slot/adapter/port
slot—Number of the chassis slot in the range
0–5 (E120 router) and 0–5 or 11–16 (E320
router)
adapter—Identifier for the IOA within the
chassis slot, either 0 or 1, where:
0 indicates that the IOA is installed in the
right IOA bay (E120 router) or the upper IOA
bay (E320 router).
1 indicates that the IOA is installed in the
left IOA bay (E120 router) or the lower IOA
bay (E320 router).
port—Port number on the IOA
slot/adapter/port
slot—Number of the chassis slot in the range
0–5 (E120 router) and 0–5 or 11–16 (E320
router)
adapter—Identifier for the IOA within the
chassis slot, either 0 or 1, where:
0 indicates that the IOA is installed in the
right IOA bay (E120 router) or the upper IOA
bay (E320 router).
1 indicates that the IOA is installed in the
left IOA bay (E120 router) or the lower IOA
bay (E320 router).
port—Port number on the IOA
Copyright © 2010, Juniper Networks, Inc.
Example
pos 5/0/0
sonet 3/0/0
sonet 3/0/0