Notification Id - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide N to Z

notification id

Syntax
Release Information
Description
Options
Mode
90
notification id { mteEventSetFailure | mteTriggerFailure | mteTriggerFalling |
mteTriggerRising }
no notification [ id ]
Command introduced before JunosE Release 7.1.0.
Specifies a trap notification for an event. The no version removes the notification.
id—MIB object for notification use
mteEventSetFailure—Trap to indicate an event set failure
mteTriggerFailure—Global trap to indicate the failure of a trigger
mteTriggerFalling—Trap to indicate a falling trigger event
mteTriggerRising—Trap to indicate a rising trigger event
SNMP Event Configuration
Copyright © 2010, Juniper Networks, Inc.