Ospf Shutdown - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

ospf shutdown

Syntax
Release Information
Description
Mode
Copyright © 2010, Juniper Networks, Inc.
[ no ] ospf shutdown
Command introduced before JunosE Release 7.1.0.
Administratively disables OSPF on the router. The no version reenables OSPF on the
router.
NOTE: This command is replacing the no ospf enable command to disable
OSPF on the router. The no ospf enable command may be removed
completely in a future release.
Router Configuration
Chapter 3: O Commands
119