Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual page 479

Mode
Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
reserved—0x04
ip-frag-offset—Matches the specified IP fragmentation offset; use any of the following:
eq 0—Equals 0
eq 1—Equals 1
gt 1—Greater than 1
precNum—Upper three bits of the ToS byte; in the range 0–7
dsFieldNum—Upper six bits of the ToS byte; in the range 0–63
tosNum—Whole eight bits of the ToS byte; in the range 0–255
classifierNumber—Index of the classifier control list entry to be deleted
Global Configuration
Configuring CLI-Based Mirroring
Chapter 7: S Commands
437