Table of Contents
Advertisement
rate-limit-profile
Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
To create or modify a rate-limit profile:
[ no ] profileType rate-limit-profile profileName [ rateLimitType ]
To specify a rate-limit profile in a policy in classifier-group mode:
[ no ] [ suspend ] rate-limit-profile profileName
To create a hierarchical rate-limit profile:
[ no ] rate-limit-profile profileName [ two-rate | one-rate ] hierarchical
To specify a rate-limit for an external parent group:
rate-limit-profile profileName
no rate-limit-profile
Command introduced before JunosE Release 7.1.0.
hierarchical keyword added in JunosE Release 7.2.0.
Parent Group Configuration mode added in JunosE Release 8.0.0.
From Global Configuration mode, creates a rate-limit profile and enters Rate Limit Profile
Configuration mode. The no version deletes the rate-limit profile.
From Classifier Group Configuration mode, creates a rate-limit profile rule in a policy list.
The no version removes a rate-limit profile from a policy list; the suspend version suspends
the rule; the no suspend resumes a suspended rule.
NOTE: The Classifier Group Configuration mode version of the
rate-limit-profile command replaces the Policy List Configuration mode
version, which may be removed completely in a future release.
From Parent Group Configuration mode, creates a parent group in a hierarchy.
The hierarchical keyword creates a hierarchical rate limit. The no version removes a
hierarchical rate-limit profile.
profileType—ip, ipv6, l2tp, or mpls; for backward compatibility, if you do not specify a
profile type, the router creates an IP profile
profileName—Name of the rate-limit profile
rateLimitType—One-rate or two-rate
Classifier Group Configuration, Global Configuration, Parent Group Configuration
Chapter 6: R Commands
357
Advertisement
Table of Contents
