Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual page 612

JunosE 11.3.x Command Reference Guide N to Z
Mode
570
origin—Origin of the route
originator-id—Router ID of the router in the local AS that originated the route
out-label—MPLS label for the route; the label sent with outgoing MPLS frames; also
the label received from MP-BGP peer; typically, but not always, this is the label
received from MP-BGP peers
peer—IP address of BGP peer from which route was learned
peer-type—Type of BGP peer: internal, external, or confederation
rd—Route distinguisher
safi—Subsequent address family identifier
stale—Route that has gone stale due to peer restart
unknown-types—Attribute codes for unknown path attributes
weight—Weight of the route
*—Indicates that one or more parameters can be repeated multiple times in a list in
the command line
filter—See Filtering show Commands on page 4
Privileged Exec, User Exec
Copyright © 2010, Juniper Networks, Inc.