Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual page 700

JunosE 11.3.x Command Reference Guide N to Z
Mode
658
To represent the binary sequence 0a 00 (hex), use the string '\\n'. This consists of
two ASCII characters: 5c for \\, and 6e for n.
For example, to match the sequence 74 65 73 74 0a 00 6f 6e 65 (hex), use the string
'test\\none'. In this string, 74 is represented by t, 65 is represented by e, 73 is
represented by s, 74 is represented by t, 0a 00 is represented by \\n, 0a is represented
by \\n, 6f is represented by o, 6e is represented by n, and 65 is represented by e.
To represent all other cases, use the string '\\xab', where ab is a hex code of the
byte. For example, to represent byte 3A, use '\\x3a'. This consists of four ASCII
characters: 5c for \\, 78 for x, 33 for 3, and 61 for a.
As another example, to match the sequence 74 65 73 74 f3 6f 6e 65 (hex), use the
string 'test\\xf3one'. In this string, 74 is represented by t, 65 is represented by e, 73
is represented by s, 74 is represented by t, byte F3 is represented by \\xf3, 6f is
represented by o, 6e is represented by n, and 65 is represented by e.
Privileged Exec
Copyright © 2010, Juniper Networks, Inc.