Radius Tunnel-Accounting - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide N to Z

radius tunnel-accounting

Syntax
Release Information
Description
Options
Mode
352
radius tunnel-accounting { enable | disable }
no radius tunnel-accounting
Command introduced before JunosE Release 7.1.0.
Enables or disables tunnel accounting. The no version restores the default value, disable.
enable—Specifies the feature
disable—Disables the feature; this is the default setting
Global Configuration
Copyright © 2010, Juniper Networks, Inc.