Page 2 Products made or sold by Juniper Networks or components thereof might be covered by one or more of the following patents that are owned by or licensed to Juniper Networks: U.S. Patent Nos. 5,473,599, 5,905,725, 5,909,440, 6,192,051, 6,333,650, 6,359,479, 6,406,312, 6,429,706, 6,459,579, 6,493,347, 6,538,518, 6,538,899, 6,552,918, 6,567,902, 6,578,186, and 6,590,785.
Page 3 REGARDING LICENSE TERMS. 1. The Parties. The parties to this Agreement are (i) Juniper Networks, Inc. (if the Customer’s principal office is located in the Americas) or Juniper Networks (Cayman) Limited (if the Customer’s principal office is located outside the Americas) (such applicable entity being referred to herein as “Juniper”), and (ii) the person or organization that originally purchased from Juniper or an authorized Juniper reseller the applicable...
Page 4 Customer shall be liable for any such violations. The version of the Software supplied to Customer may contain encryption or other capabilities restricting Customer’s ability to export the Software without an export license. Copyright © 2010, Juniper Networks, Inc.
Page 5 (including Juniper modifications, as appropriate) available upon request for a period of up to three years from the date of distribution. Such request can be made in writing to Juniper Networks, Inc., 1194 N. Mathilda Ave., Sunnyvale, CA http://www.gnu.org/licenses/gpl.html...
Page 21: About The Documentation
Audience This guide is intended for experienced system and network specialists working with Juniper Networks E Series Broadband Services Routers in an Internet access environment. E Series and JunosE Text and Syntax Conventions Table 1 on page xxii defines notice icons used in this documentation.
Page 22: Table 1: Notice Icons
Indicates that you must press two or more Press Ctrl + b. keys simultaneously. Syntax Conventions in the Command Reference Guide Plain text like this Represents keywords. terminal length Italic text like this Represents variables. mask, accessListName xxii Copyright © 2010, Juniper Networks, Inc.
Page 23: Documentation Feedback
CD-ROMs or DVD-ROMs, see the Portable Libraries page at http://www.juniper.net/techpubs/resources/index.html Copies of the Management Information Bases (MIBs) for a particular software release are available for download in the software image bundle from the Juniper Networks Web site at http://www.juniper.net/...
Page 24 7 days a week, 365 days a year. Self-Help Online Tools and Resources For quick and easy problem resolution, Juniper Networks has designed an online self-service portal called the Customer Support Center (CSC) that provides you with the following features: Find CSC offerings: http://www.juniper.net/customers/support/...
Page 27: Chapter 1 System Logging Overview
The minimum severity of a log message for an individual category is described either by a severity number in the range 0–7 or a descriptive priority term, such as emergency or debug. The lower the severity number is, the higher the priority. See Table 3 on page 4. Copyright © 2010, Juniper Networks, Inc.
Page 28: Table 3: Log Severity Descriptions
Log messages can survive a system reboot. After a reboot, the system rebuilds the list of log messages. However, if the system detects any problems or has gone through a power cycle, the buffer is reset, and the log messages from the previous session are lost. Copyright © 2010, Juniper Networks, Inc.
Page 29: Logging Platform Considerations
See the ERX Module Guide for modules supported on ERX7xx models, ERX14xx models, and the Juniper Networks ERX310 Broadband Services Router. See the E120 and E320 Module Guide for modules supported on the Juniper Networks E120 and E320 Broadband Services Routers.
Page 30 Issuing an include command after an exclude command (or vice versa) overrides the earlier command. Therefore, you cannot enter a command including certain categories and then follow it with a command excluding others. Similarly, you cannot Copyright © 2010, Juniper Networks, Inc.
Page 31 10.1.2.3 exclude isisGeneral host1(config)#log destination syslog 10.1.2.3 include ospfGeneral Use the no version to reverse the effects of previous commands or restore the default, which is to log all event categories. See log destination. Copyright © 2010, Juniper Networks, Inc.
Page 32 Use the no version to restore the actual source interface type and location. See log destination syslog source. log engineering Use to enable engineering logs. Provides troubleshooting information to assist you when contacting Juniper Networks Technical Assistance Center (JTAC). Example host1(config)#log engineering Use the no form of this command to disable engineering logs.
Page 33 Use to set the verbosity level for a selected category or for all categories. If you do not specify a category, then the verbosity level is set for all categories. The default verbosity setting for all logs is low. Example host1(config)#log verbosity low Copyright © 2010, Juniper Networks, Inc.
Page 34: Configuring Log Severity For Individual And Systemwide Logs
To see whether individual or systemwide severity and verbosity settings are in effect, use the show log configuration command. Example The following example demonstrates the effects of event category state in regard to using systemwide commands: Copyright © 2010, Juniper Networks, Inc.
Page 35 Change the atm category to have a log severity of Emergency and view the log configuration: host1(config)#log severity emergency atm host1(config)#run show log config log destination console severity WARNING log destination nv-file severity CRITICAL log destination syslog 10.10.4.240 facility 7 severity DEBUG Copyright © 2010, Juniper Networks, Inc.
Page 36 CRITICAL log destination syslog 10.10.4.240 facility 7 severity DEBUG no log engineering log fields timestamp instance no-calling-task no log here Warning: Logging to this terminal is disabled log severity OFF Copyright © 2010, Juniper Networks, Inc.
Page 37 10.10.4.240 facility 7 severity DEBUG no log engineering log fields timestamp instance no-calling-task no log here Warning: Logging to this terminal is disabled no log severity category severity verbosity filters notes -------------------- -------- --------- ------- ----- Copyright © 2010, Juniper Networks, Inc.
Page 38: Configuring Log Verbosity For Individual Logs Or All Logs
NOTICE 05/14/2001 18:24:45 cliCommand: "service timestamps log datetime", console *********************************************************** Display UTC and the time zone on the log messages. host1#configure terminal host1(config)#service timestamps log datetime show-timezone host1(config)#exit host1#show log data category cliCommand severity info Copyright © 2010, Juniper Networks, Inc.
Page 39: Configuring Log Filters
Select an access list for the filter Select import/in direction for the filter Select export/out direction for the filter peer Select a peer IP address for the filter route-map Select a route map for the filter Copyright © 2010, Juniper Networks, Inc.
Page 40: Turning Off Log Filters
To turn off a specific filter, use the no version of the log severity command that you used to add the filter. For example: host1(config)#no log severity bgpEvents peer 10.0.0.2 10.0.0.1 Copyright © 2010, Juniper Networks, Inc.
Page 41: Monitoring Logging System Events
Example 2—Individual log udpTraffic is set to warning host1#(config)#log severity warning udpTraffic host1##show log configuration log destination console severity WARNING log destination nv-file severity CRITICAL no log engineering log fields timestamp instance no-calling-task no log severity Copyright © 2010, Juniper Networks, Inc.
Page 42 Example 4—Individual log atm is set to severity warning host1#(config)#log severity warning atm host1#show log configuration log destination console severity WARNING log destination nv-file severity CRITICAL no log engineering log fields timestamp instance no-calling-task log severity ALERT Copyright © 2010, Juniper Networks, Inc.
Page 43 Example host1#show log data category os delta—Limits the display to events that occurred after the time set with the log baseline command. nv-file—Displays the information that is currently logged to nonvolatile storage. Copyright © 2010, Juniper Networks, Inc.
Page 44 By combining keywords, you can further limit the information displayed. See the CLI online Help for information about the keywords available at each level. host1#show log data nv-file severity alert See show log data. Copyright © 2010, Juniper Networks, Inc.
Page 45: Chapter 2 Event Categories
The log strategy shows the type of information logged for each severity level. In addition, this chapter includes the filters available in each event category. Copyright © 2010, Juniper Networks, Inc.
Page 47: Event Categories
P Commands on page 187 Q Commands on page 207 R Commands on page 209 S Commands on page 223 T Commands on page 239 U Commands on page 247 V Commands on page 249 Copyright © 2010, Juniper Networks, Inc.
Page 49: A Commands
Emergency None Alert None Critical None Error None Warning Log Illegal service category traffic parameter received from AAA; unable to modify circuit traffic parameters using those received from AAA Notice Log None Info None Copyright © 2010, Juniper Networks, Inc.
Page 50: Aaaenginegeneral
Control flow and key events, less verbose than debug Info None Debug Control flow and key events Filter None aaaQosCfg Description AAA QoS configuration logs Emergency None Alert None Critical None Error None Warning Log None Notice Log None Info None Copyright © 2010, Juniper Networks, Inc.
Page 51: Aaaservergeneral
Duplicate prefix event received for profileHandle: profileHandle Filter None aaaUserAccess Description AAA user access Emergency None Alert None Critical None Copyright © 2010, Juniper Networks, Inc.
Page 52: Addressservergeneral
Address server request failure (for example, configured address server is not available) Notice Log None Info None Debug None Filter None ar1AaaServerGeneral Description Platform-dependent AAA server Emergency None Alert None Critical None Error Internal (NVS) errors for limit configuration per interface Copyright © 2010, Juniper Networks, Inc.
Page 53: Atm
Dropping interface up, down, or not present notification due to removal of interface; discarding F4 OAM circuits when interface does not support F4 OAM Debug None Filter None atm1483 Description ATM 1483 data service Emergency None Copyright © 2010, Juniper Networks, Inc.
Page 54: Atm1483Vcclass
Failure to find the PVCs associated with this VC class; failure to apply the VC class attributes to the appropriate PVCs; the log message displays a brief description of the failure Notice Log None Copyright © 2010, Juniper Networks, Inc.
Page 55: Atmaal5
Resource failure errors, such as error allocating memory for adding a VC class; internal software errors; error processing a VC class association; when using SNMP, unable to set a VC class state from not in service to in service, or vice-versa; unable to find an Copyright © 2010, Juniper Networks, Inc.
Page 56: Auditipsec
Unable to update mirrored storage for a high availability switchover Filter None auditIpsec Description IKE SA negotiations Emergency None Alert None Critical None Error None Warning Log None Notice Log Information about IKE SA negotiation payloads Info None Debug None Filter None Copyright © 2010, Juniper Networks, Inc.
Page 57: B Commands
42 bgpRoutes on page 43 bridge on page 46 bridgeEngine on page 46 bridgingMgr on page 47 bulkStats on page 47 bfdAdaptivity Description BFD adaptivity events Emergency None Alert None Critical None Error None Copyright © 2010, Juniper Networks, Inc.
Page 58: Bfdevents
None Error None Warning Log None Notice Log None Info BFD session state changes Debug None Filter None bfdGeneral Description BFD general events Emergency None Alert None Critical None Error None Warning Log None Copyright © 2010, Juniper Networks, Inc.
Page 59: Bfdsession
Description BGP TCP/IP connection activity Emergency None Alert None Critical None Error Error setting password for specified peer; error binding to update-source address for specified peer Warning Log TCP error occurred while receiving data Copyright © 2010, Juniper Networks, Inc.
Page 60: Bgpdampening
Description BGP dampening Emergency None Alert None Critical None Error None Warning Log None Notice Log Route is suppressed by route-flap dampening; route is no longer suppressed by route-flap dampening Info None Debug None Copyright © 2010, Juniper Networks, Inc.
Page 61: Bgpevents
Filter 3 route-map—This filter is not currently supported Filter 4 router—See description of the bgpRoutes router filter for information about this filter Filter 5 in—This filter is not currently supported Copyright © 2010, Juniper Networks, Inc.
Page 62: Bgpgeneral
Filter 5 in—This filter is not currently supported Filter 6 out—This filter is not currently supported bgpGracefulRestart Description BGP Graceful Restart Feature log Emergency None Alert None Critical None Copyright © 2010, Juniper Networks, Inc.
Page 63: Bgpipv6Nexthops
BGP indirect next-hops for IPv6 NLRI Emergency None Alert None Critical None Error Errors in BGP IPv6 next hop events and state transitions Warning Log None Notice Log State transitions of BGP IPv6 next hops Info None Copyright © 2010, Juniper Networks, Inc.
Page 64: Bgpkeepalives
NOTE: Send messages are logged to the bgpKeepAlives log when a message is added to the send queue. A debug message is logged in to the bgpConnections log when the message is actually passed to TCP. Copyright © 2010, Juniper Networks, Inc.
Page 65: Bgpmessages
Filter 4 router—See description of the bgpRoutes router filter for information about this filter Filter 5 in—Matches on traffic coming into the router Filter 6 out—Matches on traffic going out of the router Copyright © 2010, Juniper Networks, Inc.
Page 66: Bgpneighborchanges
Description VPN and non-VPN BGP indirect next hops Emergency None Alert None Critical None Error Errors in BGP next hop events and state transitions Warning Log None Copyright © 2010, Juniper Networks, Inc.
Page 67: Bgproutes
MPLS tunnel for Inter-AS label came up or went down; route added to L2VPN instance; route deleted from L2VPN instance; route modified for L2VPN instance; -VE device for multihomed local layer 2 site 1 changed from peer to peer2 Info None Copyright © 2010, Juniper Networks, Inc.
Page 70: Bridge
Verbose bridge interface, learning, aging, and static MAC address configuration and status Filter None bridgeEngine Description Bridge engine configuration Emergency None Alert None Critical None Error Bridge engine, bridge agent, and bridge interface errors Copyright © 2010, Juniper Networks, Inc.
Page 71: Bridgingmgr
Bridging manager operation state changes (init, start, shutdown); bridge mode, bridge group, and subscriber policy modifications Debug Verbose bridge mode, bridge group, and subscriber policy configuration and status Filter None bulkStats Description Bulk statistics collector Emergency None Alert None Critical None Copyright © 2010, Juniper Networks, Inc.
Page 72 Notice Log File full or file nearly full conditions, preparing to send an SNMP trap Info Status of user configuration commands Debug Tracks performance progress of bulkstats application Filter None Copyright © 2010, Juniper Networks, Inc.
Page 73: C Commands
53 cacGeneral Description CAC general purpose Emergency None Alert None Critical None Error None Warning Log Unusual conditions in IGP/CAC interaction Notice Log None Info None Debug General debugging info Filter None Copyright © 2010, Juniper Networks, Inc.
Page 74: Cacintf
NOTE: For information about interface types and specifiers, see Interface Types and Specifiers in JunosE Command Reference Guide. cliCommand Description CLI commands Emergency None Alert None Critical None Error None Warning Log None Copyright © 2010, Juniper Networks, Inc.
Page 75: Cligeneral
10G and 5G SRP modules only—That there is not enough bandwidth for a particular board in the system, that connections could not be added in the fabric due to resource limitations (such as memory), that a board was just removed and the resource will not Copyright © 2010, Juniper Networks, Inc.
Page 76: Cops
COPS layer enabled or disabled; socket remotely closed Info None Debug COPS session instantiation or removal; COPS connection or socket creation or deletion; keepalive value Filter None copsPr Description COPS-PR general log Emergency None Alert None Copyright © 2010, Juniper Networks, Inc.
Page 77: Coredump
Info None Debug lcLoader creation; dump request receipt; core dump monitor start; core dump monitor stop Filter None ctreeLog Description For internal maintenance of IP routes Emergency None Copyright © 2010, Juniper Networks, Inc.
Page 78 Failure in insertion, deletion, and update of IP routes in internal data structure used to maintain the routes Warning Log None Notice Log None Info None Debug Creation or deletion of an internal data structure Filter None Copyright © 2010, Juniper Networks, Inc.
Page 79: D Commands
66 dhcpv6DemuxGeneral on page 66 dhcpv6LsGeneral on page 67 dismanEventMgr on page 67 dnsGeneralLog on page 68 dosProtection on page 68 ds1 on page 69 ds3 on page 69 dvmrpGeneral on page 70 Copyright © 2010, Juniper Networks, Inc.
Page 80: Dcm
PPP interface failed; creation of dynamic PPPoE interface failed Filter None dcmEngineGeneral Description DCM engine general Emergency None Alert None Critical None Error None Warning Log None Notice Log None Copyright © 2010, Juniper Networks, Inc.
Page 81: Debounceevents
Ethernet debounce configuration status log Emergency None Alert None Critical None Error Error in enabling or disabling the debounce timer on the Ethernet interface Warning Log None Notice Log Debounce timer enabled or disabled on the Ethernet interface Copyright © 2010, Juniper Networks, Inc.
Page 82: Dhcpcapture
Filter None dhcpExternal Description DHCP external Emergency None Alert None Critical None Error Configuration errors; client processing errors (invalid data) Warning Log Client processing errors (resource exhaustion) Notice Log Configuration changes Copyright © 2010, Juniper Networks, Inc.
Page 83: Dhcpexternalengine
Info System events (line cards online/offline) Debug Configuration change details; client events Filter None dhcpGeneral Description DHCP general Emergency None Alert Rvn8 Critical None Error None Warning Log None Notice Log None Info None Copyright © 2010, Juniper Networks, Inc.
Page 84: Dhcpissulog
Cannot find the DHCP instance for the client with an expired lease; cannot find the DHCP instance to release the client IP address; secondary DNS without primary DNS configured, using DHCP values; secondary NetBIOS Name Server (NBNS) without primary NBNS configured, using DHCP values Copyright © 2010, Juniper Networks, Inc.
Page 85: Dhcplocalgeneral
Any log message that indicates the status of the general operation of the DHCP local server; NVS actions; grace period lease state; configuration changes Filter None NOTE: This category replaces the dhcpLocalServerGeneral category. dhcpLocalHighAvailability Description DHCP local high availability Emergency None Alert None Copyright © 2010, Juniper Networks, Inc.
Page 86: Dhcplocalpool
Lower limit of address pool utilization reached; invalid DHCP local address pool attributes Notice Log None Info None Debug DHCP local address pool resolution; address allocation Filter None dhcpLocalProtocol Description DHCP local server protocol Emergency None Copyright © 2010, Juniper Networks, Inc.
Page 87: Dhcpofferlog
NOTE: For information about interface types and specifiers, see Interface Types and Specifiers in JunosE Command Reference Guide. dhcpOfferLog Description DHCP offer selection process log Emergency None Alert None Critical None Error None Warning Log None Copyright © 2010, Juniper Networks, Inc.
Page 88: Dhcppbegeneral
Failure to restore client after reboot or interface change; failure to allocate memory from task-controlled pools Info None Debug Status of task and DHCP operations Filter None dhcpProxyGeneral Description DHCP Proxy general Emergency None Alert None Critical None Error None Warning Log None Copyright © 2010, Juniper Networks, Inc.
Page 89: Dhcprelaygeneral
None Alert None Critical None Error Out of memory conditions Warning Log Unexpected unified ISSU signal, removing all NVS and routing table entries at startup, removing routing table entries at startup due to inconsistencies Copyright © 2010, Juniper Networks, Inc.
Page 90: Dhcpv6Client
None Info None Debug None Filter None dhcpv6DemuxGeneral Description DHCPv6 packet demultiplexer events Emergency None Alert None Critical None Error UDP transmit errors, out-of-memory conditions, internal errors Warning Log Invalid DHCPv6 packet type received Copyright © 2010, Juniper Networks, Inc.
Page 91: Dhcpv6Lsgeneral
Prefix Allocation Notification: designated prefix is already in use by another client Filter None dismanEventMgr Description Distributed management event manager Emergency None Alert None Critical None Error Configuration errors; Sampling, testing and setting errors Copyright © 2010, Juniper Networks, Inc.
Page 92: Dnsgenerallog
DNS disabled in virtual router; trace DNS cache cleanup Filter None dosProtection Description DoS general Emergency None Alert None Critical Suspicious control flows exceed threshold for specific line module; possible distributed DoS attack Copyright © 2010, Juniper Networks, Inc.
Page 93: Ds1
Info Dropped interface state change notification for unknown or removed interface Debug None Filter None Description DS3 layer Emergency None Alert None Critical None Copyright © 2010, Juniper Networks, Inc.
Page 94: Dvmrpgeneral
DvmrpInit; dvmrpEnable/Disable; rpfCallback Filter 1 interface interfaceType interfaceSpecifier interface—Logs events for a specific interface interfaceType—Type of interface for which you want to log events Copyright © 2010, Juniper Networks, Inc.
Page 95: Dvmrpgracefulrestart
Specifiers in JunosE Command Reference Guide. dvmrpGracefulRestart Description DVMRP graceful restart Emergency None Alert None Critical None Error None Warning Log None Notice Log DVMRP graceful restart complete Info None Debug None Filter None Copyright © 2010, Juniper Networks, Inc.
Page 96: Dvmrpmcasttable
Filter 2 router—See description of the dvmrpGeneral router filter for information about this filter dvmrpProbeRcv Description DVMRP probe received Emergency None Alert None Critical None Error None Warning Log None Notice Log procProbe new neighbor Copyright © 2010, Juniper Networks, Inc.
Page 97: Dvmrpprobesent
Filter 2 router—See description of the dvmrpGeneral router filter for information about this filter dvmrpRtTable Description DVMRP Routing Table Emergency None Alert None Critical None Copyright © 2010, Juniper Networks, Inc.
Page 98 Debug Delete route; insert route Filter 1 interface—See description of the dvmrpGeneral interface filter for information about this filter Filter 2 router—See description of the dvmrpGeneral router filter for information about this filter Copyright © 2010, Juniper Networks, Inc.
Page 99: E Commands
Debug Interface created or deleted Filter None ethernetStateSession Description Configuration of the Fast Ethernet management port on the SRP IOA on the E320 router or the E120 router Emergency None Alert None Critical None Copyright © 2010, Juniper Networks, Inc.
Page 100 Configuration errors for duplex mode and speed settings on the Fast Ethernet management port Warning Log Configuration did not occur for duplex mode and speed on the Fast Ethernet management port Notice Log None Info None Debug None Filter None Copyright © 2010, Juniper Networks, Inc.
Page 101: F Commands
Configuration consistency check failed; HA/sync may be desabled Error Error enabling or disabling Warning Log Missing of invalid armed files Notice Log Configuration checkerenabled or disabled Info None Debug Timestamp of last synchronization Filter None Copyright © 2010, Juniper Networks, Inc.
Page 102: Flowinspection
Flow inspection engine Emergency None Alert None Critical None Error None Warning Log Virtual router not found during deletion request Notice Log None Info None Debug Engine creation, timer state information, setCoreLocation notification Filter None Copyright © 2010, Juniper Networks, Inc.
Page 103: Flowservicesfirewallalert
Description Firewall Emergency None Alert None Critical None Error New connection disallowed Warning Log None Notice Log Transition from half-open to fully complete connection; transition to half-open connection Info None Debug None Filter None Copyright © 2010, Juniper Networks, Inc.
Page 104: Framerelay
File transfer initialization failure; unexpected software error Notice Log None Info File transfer notification; platform or release mismatch; file transfer error; release file is corrupt; image path not found; insufficient resources to copy release Copyright © 2010, Juniper Networks, Inc.
Page 105: Ft1
Description FTP client Emergency None Alert None Critical None Error Unexpected results during a transfer Warning Log None Notice Log Completion status of a network connection command (example: “ Succeeded creating data socket” ) Copyright © 2010, Juniper Networks, Inc.
Page 106 Notice Log Daemon task created; waiting for new client connection; accept client from host a.b.c.d; maximum client sessions exceeded; FTP daemon shutdown complete Info Starting FTP daemon shutdown Debug Read FTP command Filter None Copyright © 2010, Juniper Networks, Inc.
Page 107: Gplaan
Error Out of resources Warning Log None Notice Log Task creation or deletion Info None Debug Adding or deleting IP addresses; adding or deleting user sessions Filter None Description High availability messages Emergency None Copyright © 2010, Juniper Networks, Inc.
Page 108: Hdlc
(might not cause problems) Notice Log Interface pool changes Info Layer initialization messages; interface creation; interface modification; interface deletion Debug Detailed layer initialization; interface creation details; interface deletion details Filter None hotfixGeneral Description Hotfix general Copyright © 2010, Juniper Networks, Inc.
Page 109: Httpserver
HTTP events; updated HTTP scalars; handed out (global/token) address to dhcp-ls client; authentication passed from dhcp-ls for a given client; renewing token address for dhcp-ls client; removed session with dhcp-ls; removed Copyright © 2010, Juniper Networks, Inc.
Page 110 HTTP event; aging group of httpcs; added new address at dhcp-ls session; phase 1 of 2 for authentication passed from dhcp-ls for a given client; revoking token address for a given dhcp-ls client Filter None Copyright © 2010, Juniper Networks, Inc.
Page 111: I Commands
101 ipProfileMgr on page 101 ipRoutePolicy on page 102 ipRouteTable on page 102 ipsecIdDb on page 103 ipsecP1Throttler on page 103 ipsecXcfgSM on page 104 ipSubscriberMgr on page 104 ipTraffic on page 105 Copyright © 2010, Juniper Networks, Inc.
Page 112 119 isisSpfStatistics on page 120 isisSpfTriggers on page 120 isisUpdatePackets on page 121 isVoice on page 121 itm on page 122 icImageFixServer Description IC image fix server Emergency None Alert None Critical None Copyright © 2010, Juniper Networks, Inc.
Page 113 [ ipAddressMask ] remote-ip-address—Logs events for a remote address ipAddress—Address of remote system for which you want to log messages ipAddressMask—Mask for the remote address Filter 2 router virtualRouterName [ remote-ip-address ipAddress [ ipAddressMask ] ] Copyright © 2010, Juniper Networks, Inc.
Page 114 IPv6 address ipv6Address—Address of remote system for which you want to log messages icrPartitionManager Description Interchassis Redundancy Partition Manager Copyright © 2010, Juniper Networks, Inc.
Page 115 Notice Log Errors while configuring or learning groups Info None Debug IGMP interface or group state change; errors in packet transmit or receive Filter 1 interface interfaceType interfaceSpecifier interface—Logs events for a specific interface Copyright © 2010, Juniper Networks, Inc.
Page 116 Specifiers in JunosE Command Reference Guide. igmpGracefulRestart Description IGMP graceful restart Emergency None Alert None Critical None Error None Warning Log None Notice Log IGMP/MLD graceful restart complete Info None Debug None Filter None Copyright © 2010, Juniper Networks, Inc.
Page 117 NOTE: For information about interface types and specifiers, see Interface Types and Specifiers in JunosE Command Reference Guide. ikeCertificateMgr Description Displays events relating to ERX key generation, certificate status, and certificate processing Emergency None Alert None Copyright © 2010, Juniper Networks, Inc.
Page 118 Received CA certificate; received CA and RA certificate chain; received ERX certificate; retry scep poll message Debug Found CA certificate; found ERX certificates; enrollment failure details Filter None ikepki Description IKE SA negotiation Emergency None Copyright © 2010, Juniper Networks, Inc.
Page 119 Ping monitoring threshold exceeded; ICC session monitoring threshold exceeded; ICC connection monitoring threshold exceeded Info Intermodule communication monitoring condition, state change, and corresponding action Debug None Filter slot slotNumber slot—Logs events for a specific slot Copyright © 2010, Juniper Networks, Inc.
Page 120 ID number for which you want to log events; the element ID is automatically assigned for access-list rules that you explicitly create and is shown by issuing the show access-list detail command ipEngine Description IP chassis manager Emergency None Copyright © 2010, Juniper Networks, Inc.
Page 121 Alert None Critical None Error None Warning Log None Notice Log None Info Notifying AAA about duplicate prefix: profileHandle ( authId: authId, rtr uid: router ) Debug None Filter None ipflowstats Description J-Flow statistics Copyright © 2010, Juniper Networks, Inc.
Page 122 Problems bring modules or slots up or down Notice Log None Info Agent or master creation; slot or operation state information Debug Creation or removal of engine; initialization problems Filter None ipGeneral Description IP general Emergency None Copyright © 2010, Juniper Networks, Inc.
Page 123 For example, atm or fastEthernet. interfaceSpecifier—Location of interface in the appropriate format NOTE: For information about interface types and specifiers, see Interface Types and Specifiers in JunosE Command Reference Guide. Copyright © 2010, Juniper Networks, Inc.
Page 124 Error status is returned by lower layer configuration; best route is pointing to an unnumbered interface with an invalid source IP address; unnumbered interface is pointing to invalid loopback interface problems; packets received with invalid source IP address on interfaces Notice Log None Copyright © 2010, Juniper Networks, Inc.
Page 125 Notice Log None Info None Debug None Filter None ipProfileMgr Description IP Profile Manager Emergency None Alert None Critical None Error Failure to create or delete dynamic IP interfaces Warning Log None Notice Log None Copyright © 2010, Juniper Networks, Inc.
Page 126 IP route policy events for a specific virtual router virtualRouterName—Name of virtual router for which you want to log events ipRouteTable Description IP routing table Emergency None Alert None Critical None Copyright © 2010, Juniper Networks, Inc.
Page 127 Internal dBase issue with hashes Warning Log Problems adding or deleting entries Notice Log None Info Adding entries to database Debug Detailed database information and transactions Filter None ipsecP1Throttler Description Ongoing phase 1 negotiations Emergency None Alert None Copyright © 2010, Juniper Networks, Inc.
Page 128 Internal state machine errors Warning Log State machine unexpected events; problems with xauth negotiations Notice Log Significant state changes Info None Debug None Filter None ipSubscriberMgr Description IP Subscriber Manager Emergency None Alert None Copyright © 2010, Juniper Networks, Inc.
Page 129 Filter 1 interface—See description of the ipGeneral interface filter for information about this filter Filter 2 router—See description of the ipGeneral router filter for information about this filter ipTunnel Description IP tunnel Emergency None Copyright © 2010, Juniper Networks, Inc.
Page 130 IPv6 access lists Filter 2 accessList router virtualRouterName access-list accessListName access-element-id idNumber accessList—Logs a match on any access-list entry router—Logs events for a specific virtual router Copyright © 2010, Juniper Networks, Inc.
Page 131 NOTE: For information about interface types and specifiers, see Interface Types and Specifiers in JunosE Command Reference Guide. Filter 2 router virtualRouterName [ interface interfaceType interfaceSpecifier ] Copyright © 2010, Juniper Networks, Inc.
Page 132 Filter 1 interface—See description of the ipv6General interface filter for information about this filter Filter 2 router—See description of the ipv6General router filter for information about this filter ipv6ProfileMgr Description IPv6 Profile Manager Emergency None Copyright © 2010, Juniper Networks, Inc.
Page 133 Filter 1 interface—See description of the ipv6General interface filter for information about this filter Filter 2 router—See description of the ipv6General router filter for information about this filter Copyright © 2010, Juniper Networks, Inc.
Page 134 Emergency None Alert None Critical System out of memory error for allocating IPv6 addresses; IPv6 shutdown started in all virtual routers Error System low on memory; IPv6 address allocation may fail Warning Log None Copyright © 2010, Juniper Networks, Inc.
Page 135 [ interface interfaceType interfaceSpecifier ] router—Logs events for a specific virtual router virtualRouterName—Name of virtual router for which you want to log events interface—Logs events on a specific interface on the virtual router Copyright © 2010, Juniper Networks, Inc.
Page 136 Description IS-IS and BFD interaction and IS-IS session log Emergency None Alert None Critical None Error BFD to IS-IS interaction failure errors; out of memory errors Copyright © 2010, Juniper Networks, Inc.
Page 137 Filter 2 router—See description of the isisAdjChange router filter for information about this filter isisGeneral Description IS-IS system notifications Emergency None Alert None Critical None Copyright © 2010, Juniper Networks, Inc.
Page 138 Timer expiration and other normal events Filter 1 interface—See description of the isisAdjChange interface filter for information about this filter Filter 2 router—See description of the isisAdjChange router filter for information about this filter isisHelloPackets Description IS-IS hello packets Copyright © 2010, Juniper Networks, Inc.
Page 139 Info None Debug IS-IS IPv6 events Filter 1 interface—See description of the isisAdjChange interface filter for information about this filter Filter 2 router—See description of the isisAdjChange router filter for information about this filter Copyright © 2010, Juniper Networks, Inc.
Page 140 Emergency None Alert None Critical None Error None Warning Log None Notice Log Sent local LSP Info None Debug None Filter 1 interface—See description of the isisAdjChange interface filter for information about this filter Copyright © 2010, Juniper Networks, Inc.
Page 141 None Critical None Error None Warning Log None Notice Log None Info Start or stop MPLS function; tunnel in use by IS-IS; explicit route computation Debug Detailed debugging information for MPLS function Filter None Copyright © 2010, Juniper Networks, Inc.
Page 143 Filter 2 router—See description of the isisAdjChange router filter for information about this filter isisSpfEvents Description IS-IS Shortest Path First (SPF) Emergency None Alert None Critical None Error None Copyright © 2010, Juniper Networks, Inc.
Page 144 Info None Debug None Filter router virtualRouterName router—Logs events for a specific virtual router virtualRouterName—Name of virtual router for which you want to log events isisSpfTriggers Description IS-IS SPF triggering Emergency None Alert None Copyright © 2010, Juniper Networks, Inc.
Page 145 Set or cleared SRM flags; building LSP Filter 1 interface—See description of the isisAdjChange interface filter for information about this filter Filter 2 router—See description of the isisAdjChange router filter for information about this filter isVoice Description IS Voice application Copyright © 2010, Juniper Networks, Inc.
Page 146 IPSec transport interface interaction with IKE protocol; interface pool usage Debug Details about the interaction between the IPSec transport interface and the IKE protocol; configuration and operational changes of the IPSec transport interface events; interface engine interaction Filter None Copyright © 2010, Juniper Networks, Inc.
Page 147: Chapter 11 L Commands
133 ldpSocket on page 133 ldpTimer on page 134 ldpVpls on page 135 ldpWorker on page 135 localAddressServerGeneral on page 136 localAuthServer on page 136 localEnableAuthServer on page 137 localLinePassword on page 137 Copyright © 2010, Juniper Networks, Inc.
Page 148 Neighbor, socket events Filter None l2cKeepAlive Description Layer 2 Control adjacency packets Emergency None Alert None Critical None Error None Warning Log None Notice Log None Info None Debug Adjacency protocol packet processing Filter None Copyright © 2010, Juniper Networks, Inc.
Page 149 Layer 2 Tunneling Protocol Emergency None Alert None Critical Nonrecoverable error Error Configuration error Warning Log Protocol error; insufficient resources Notice Log Status change; protocol warnings Info Protocol operational information Debug Detailed debugging information Filter None Copyright © 2010, Juniper Networks, Inc.
Page 150 None Filter None l2tpDisconnectCause Description L2TP disconnect cause Emergency None Alert None Critical None Error None Warning Log None Notice Log None Info Disconnect error code information generated at LAC Debug None Filter None Copyright © 2010, Juniper Networks, Inc.
Page 151 None Filter None l2tpStateMachine Description Layer 2 Tunnel Protocol state machine trace Emergency None Alert None Critical None Error None Warning Log None Notice Log None Info None Debug State machine trace Filter None Copyright © 2010, Juniper Networks, Inc.
Page 152 None ldpConnect Description LDP connection information Emergency None Alert None Critical None Error Memory allocation failure. Warning Log None Notice Log LDP connection creation and deletion information Info None Debug None Filter router virtualRouterName Copyright © 2010, Juniper Networks, Inc.
Page 153 Description LDP graceful restart events Emergency None Alert None Critical None Error None Warning Log None Notice Log LDP Neighbor Graceful Restart state changes Copyright © 2010, Juniper Networks, Inc.
Page 154 Description Displays details about the task dedicated for sending LDP hellos, the LDP hello manager Emergency None Alert None Critical None Error Memory allocation failure Copyright © 2010, Juniper Networks, Inc.
Page 156 Description LDP peer events Emergency None Alert None Critical None Error LDP neighbor authentication setting failure Warning Log None Notice Log LDP neighbor authentication transaction Info None Debug LDP peer maintenance transaction Copyright © 2010, Juniper Networks, Inc.
Page 157 NOTE: For information about interface types and specifiers, see Interface Types and Specifiers in JunosE Command Reference Guide. ldpSocket Description Displays details about the socket that is used to exchange LDP session messages and keep alives Emergency None Copyright © 2010, Juniper Networks, Inc.
Page 158 None Warning Log None Notice Log None Info None Debug Timer event information Filter router virtualRouterName router—Logs events for a specific virtual router virtualRouterName—Name of virtual router for which you want to log events Copyright © 2010, Juniper Networks, Inc.
Page 159 Displays details about the background LDP jobs (LDP worker events) Emergency None Alert None Critical None Error Memory allocation failure Warning Log Invalid PDU Notice Log Worker creation and deletion information Info TCP socket reset by peer Debug Worker running information Copyright © 2010, Juniper Networks, Inc.
Page 160 Cannot bind to local authentication server; memory cannot be allocated for local authentication server; cannot send configuration request; cannot send information request; invalid virtual router; error with specified user database; cannot create local user database at startup Copyright © 2010, Juniper Networks, Inc.
Page 161 None Info None Debug Authentication attempted; no memory for protocol message; connection granted: correct password; connection denied: incorrect password Filter None localLinePassword Description Local line password authentication server Emergency None Alert None Critical None Copyright © 2010, Juniper Networks, Inc.
Page 162 JunosE 11.2.x System Event Logging Reference Guide Error Unknown algorithm for local password Warning Log Connection granted or denied due to possible misconfiguration Notice Log None Info None Debug Connection granted or denied due to incorrect password Filter None Copyright © 2010, Juniper Networks, Inc.
Page 163: Chapter 12 M Commands
151 mplsRouter on page 152 mplsShimInterface on page 152 mplsTraffic on page 153 mrInfoLog on page 153 mrInfoRcvdLog on page 154 mrInfoSentLog on page 154 mtraceLog on page 155 mtraceRcvdLog on page 155 Copyright © 2010, Juniper Networks, Inc.
Page 164 Macro information Emergency None Alert None Critical None Error Scheduled macro cannot be run Warning Log None Notice Log Start and completion of scheduled macro, Values set using env.setResult Info None Debug None Filter None Copyright © 2010, Juniper Networks, Inc.
Page 166 IPv6 Multicast fastpath forwarding not supported on interface Notice Log Errors in MGTM API calls Info State change events; invalid parameters in API calls Debug (Source, Group) entries not found Filter 1 interface interfaceType interfaceSpecifier interface—Logs events for a specific interface Copyright © 2010, Juniper Networks, Inc.
Page 167 MGTM V6 graceful restart Emergency None Alert None Critical None Error None Warning Log None Notice Log Multicast graceful restart complete Info None Debug IGMP, PIM, IP route table multicast graceful restart complete Filter None Copyright © 2010, Juniper Networks, Inc.
Page 169 None Info MLDv1 first host join, last host done events; MLDv2 state change and source-list change events aggregated across all hosts on the interface Debug None Filter router virtualRouterName [ interface interfaceType interfaceSpecifier ] Copyright © 2010, Juniper Networks, Inc.
Page 170 Errors in hardware configuration; resource limitation in fabric reached; errors in hardware Warning Log None Notice Log None Info None Debug Initialization details; configuration details; connection status details Filter None mobileIpv4HaBinding Description Mobile IPv4 home agent binding Emergency None Alert None Critical None Copyright © 2010, Juniper Networks, Inc.
Page 171 Home agent does not exist in the virtual router Warning Log None Notice Log Mobile IP warm restart initiated Info None Debug Verifying replay attack Filter None mobileIpv4HaEvent Description Mobile IPv4 home agent events Emergency None Alert None Critical None Copyright © 2010, Juniper Networks, Inc.
Page 172 Home agent deactivated in virtual router Info Home agent activated in virtual router Debug Authentication, authorization, and accounting (AAA) granted Filter None mplsFwdTable Description MPLS fowarding table events Emergency None Alert None Critical None Error Nonfatal internal errors Copyright © 2010, Juniper Networks, Inc.
Page 173 NVS operations; timer operations; minor interface label stacking; function flows; L2VPN instance created, destroyed Filter router virtualRouterName router—Logs events for a specific virtual router virtualRouterName—Name of virtual router for which you want to log events mplsHighAvailability Description MPLS high availability events Emergency None Copyright © 2010, Juniper Networks, Inc.
Page 174 None Info None Debug Major interface finite state machine transitions; signaling protocol interaction; major interface to engine transactions; major interface configuration transactions; LSM interface label space transactions Filter router virtualRouterName [ interface interfaceType interfaceSpecifier] Copyright © 2010, Juniper Networks, Inc.
Page 176 Alert None Critical None Error Signaling protocol interaction failures; shim interface engine interaction failures; shim interface finite state machine bad state transitions; shim interface configuration errors Warning Log None Notice Log None Info None Copyright © 2010, Juniper Networks, Inc.
Page 177 Debug Detailed debugging information for all MPLS packets transmitted to and received from the SRP module Filter None mrInfoLog Description General multicast router information Copyright © 2010, Juniper Networks, Inc.
Page 178 Alert None Critical None Error None Warning Log None Notice Log None Info Number of trace packets received Debug Hexidecimal dump of packets received Filter None mrInfoSentLog Description Multicast router sent information Emergency None Copyright © 2010, Juniper Networks, Inc.
Page 179 Warning Log None Notice Log Error in received or sent mtrace packets Info None Debug Creation or deletion of Mtrace server; communication with other modules Filter None mtraceRcvdLog Description mtrace packets received Emergency None Copyright © 2010, Juniper Networks, Inc.
Page 180 None Notice Log None Info Short description of the mtrace packets sent Debug Complete print of the mtrace packets sent Filter None multicastTraffic Description IP multicast frame transmit or receive Emergency None Alert None Copyright © 2010, Juniper Networks, Inc.
Page 183: Chapter 13 N Commands
Name resolver table Emergency None Alert None Critical None Error None Warning Log None Notice Log None Info Name lookup failures Debug Name lookup processing events Filter None nfsClient Description NFS client log Emergency None Copyright © 2010, Juniper Networks, Inc.
Page 184 AAA address client Emergency None Alert None Critical None Error None Warning Log None Notice Log None Info None Debug Notification of automatic success response to address request Filter None noneAaaServer Description Authentication and accounting client Copyright © 2010, Juniper Networks, Inc.
Page 185 Attach to or detach from virtual router; shutting down NTP IP session; shutting down NTP UDP session; enable or disable NTP; connection established with NTP server; announce system clock precision Debug None Filter router ID Copyright © 2010, Juniper Networks, Inc.
Page 187: Chapter 14 O Commands
176 ospfTeSpf on page 176 ospfv3ElectDr on page 177 ospfv3General on page 178 ospfv3HelloPktsRcvd on page 179 ospfv3HelloPktsSent on page 179 ospfv3Interface on page 180 ospfV3Lsa on page 181 ospfv3Neighbor on page 181 Copyright © 2010, Juniper Networks, Inc.
Page 188 Link is disabled because the high threshold for an error is exceeded on the Ethernet OAM interface or because of the error-disable action specified to be performed in response to an OAM PDU received from a remote peer for a fault in the receive path of the link Copyright © 2010, Juniper Networks, Inc.
Page 189 Filter None Description Operating system (including image loader) Emergency None Alert Fatal software error notification (assertions, panics, exceptions); panic timer expiration; ECC memory errors Critical System halt; NVS reverting to factory defaults Copyright © 2010, Juniper Networks, Inc.
Page 190 NVS config cache flush status Filter None ospfElectDr Description OSPF designated router (DR) election Emergency None Alert None Critical None Error None Warning Log None Notice Log DR election events Info None Debug None Copyright © 2010, Juniper Networks, Inc.
Page 191 NOTE: For information about interface types and specifiers, see Interface Types and Specifiers in JunosE Command Reference Guide. ospfGeneral Description OSPF general Emergency None Alert None Critical None Copyright © 2010, Juniper Networks, Inc.
Page 192 [ interface interfaceType interfaceSpecifier ] router—Logs events for a specific virtual router virtualRouterName—Name of the virtual router for which you want to log events interface—Logs events on a specific OSPF-enabled interface on the virtual router Copyright © 2010, Juniper Networks, Inc.
Page 193 (for example, atm or fastEthernet) interfaceSpecifier—Location of the interface in the appropriate format NOTE: For information about interface types and specifiers, see Interface Types and Specifiers in JunosE Command Reference Guide. Copyright © 2010, Juniper Networks, Inc.
Page 194 Displays information about the interactions between LDP and OSPF in the course of LDP-IGP synchronization. Emergency None Alert None Critical None Error Failure to communicate with LDP and out of memory conditions Warning Log None Notice Log None Info None Debug LDP interactions Copyright © 2010, Juniper Networks, Inc.
Page 196 Packets received description Filter 1 interface-ip-address—See description of the ospfElectDr interface-ip-address filter for information about this filter Filter 2 router—See description of the ospfElectDr router filter for information about this filter ospfPktsSent Description OSPF packet sent Copyright © 2010, Juniper Networks, Inc.
Page 197 General information about significant restart operation events (for example, restart entry, exit, abort, and neighbor acquisition) Debug Details about restart operation events Filter router—See description of the ospfElectDr router filter for information about this filter Copyright © 2010, Juniper Networks, Inc.
Page 198 Errors in adding, modifying, or removing entries in tentative path entry table (TENT) and path entry table (PATH) Warning Log None Notice Log SPF (Dijkstra Shortest Path First algorithm) chunking events (for example, number of LSAs processed in an SPF chunk) Info SPF results Copyright © 2010, Juniper Networks, Inc.
Page 199 Description OSPF SPF intra-area calculation Emergency None Alert None Critical None Error Errors in adding, modifying, or removing entries in tentative path entry table (TENT) and path entry table (PATH) Copyright © 2010, Juniper Networks, Inc.
Page 200 None Filter router name virtualRouterName router name—Logs events for a specific virtual router virtualRouterName—Name of virtual router for which you want to log events ospfTeSpf Description OSPF traffic engineering SPF Emergency None Alert None Copyright © 2010, Juniper Networks, Inc.
Page 201 [ ip-address ipAddress | unnumbered interfaceType interfaceSpecifier interface-ip-address—Logs events for a specific interface ip-address—Specifies that you will identify the interface by entering an IP address ipAddress—IP address of interface for which you want to log events Copyright © 2010, Juniper Networks, Inc.
Page 202 State change errors (for example, OSPFv3 could not be enabled); errors creating or destroying an area, an OSPFv3 range, or a virtual link Notice Log OSPFv3 enabled or disabled; BFD enabled or disable on an OSPF interface Copyright © 2010, Juniper Networks, Inc.
Page 203 (for example, atm or fastEthernet) interfaceSpecifier—Location of the interface in the appropriate format ospfv3HelloPktsSent Description Sending of hello messages on OSPFv3-enabled interfaces Emergency None Copyright © 2010, Juniper Networks, Inc.
Page 204 Critical None Error Error saving or restoring OSPFv3 interface configuration Warning Log Errors for packets sent or received over the OSPFv3 interface Notice Log Creation or deletion of OSPFv3 interfaces Info None Debug None Copyright © 2010, Juniper Networks, Inc.
Page 206 Number of LSAs packed in different packet types (LSA Ack, LSA update); packets received over Down interface Info None Debug Packets received description Filter 1 interface-ip-address—See description of the ospfElectDr interface-ip-address filter for information about this filter Copyright © 2010, Juniper Networks, Inc.
Page 207 OSPF route addition, deletion, or replacement errors in the routing table Warning Log Errors for routes imported into OSPF Notice Log Forwarding address decision algorithm events Info OSPF route added to, replaced, or deleted from the routing table; route imported into OSPF Copyright © 2010, Juniper Networks, Inc.
Page 208 Description OSPFv3 SPF interarea calculation Emergency None Alert None Critical None Error Errors in adding, modifying, or removing entries in tentative path entry table (TENT) and path entry table (PATH) Copyright © 2010, Juniper Networks, Inc.
Page 209 Events in building TENT and PATH Filter 1 interface-ip-address—See description of the ospfElectDr interface-ip-address filter for information about this filter Filter 2 router—See description of the ospfElectDr router filter for information about this filter Copyright © 2010, Juniper Networks, Inc.
Page 211: Chapter 15 P Commands
200 pimsmMvpn on page 200 policyMgrAttachment on page 201 policyMgrGeneral on page 201 policyMgrPacketLog on page 202 ppp on page 202 pppoe on page 203 pppoeControlPacket on page 204 pppPacket on page 204 Copyright © 2010, Juniper Networks, Inc.
Page 212 [ interface-ip-address [ ip-address ipAddress | unnumbered interfaceType interfaceSpecifier ] ] router—Logs events for a specific virtual router virtualRouterName—Name of virtual router for which you want to log events interface-ip-address—Logs events for a specific interface on the virtual router Copyright © 2010, Juniper Networks, Inc.
Page 213 Filter 2 router—See description of the pimAutoRPRcvdLog router filter for information about this filter pimBsrRcvdLog Description Reception of PIM-SM IPv4 BSR messages (BSM and C-RP-Advs) Emergency None Alert None Copyright © 2010, Juniper Networks, Inc.
Page 214 Description of transmitted messages (specify high verbosity for detail) Debug None Filter 1 interface-ip-address—See description of the pimAutoRPRcvdLog interface-ip-address filter for information about this filter Filter 2 router—See description of the pimAutoRPRcvdLog router filter for information about this filter Copyright © 2010, Juniper Networks, Inc.
Page 215 Notice Log None Info Short description of the received PIM hello messages Debug Complete printout of the received PIM hello messages Filter 1 interface-ip-address—See description of the pimAutoRPRcvdLog interface-ip-address filter for information about this filter Copyright © 2010, Juniper Networks, Inc.
Page 216 Description Protocol Independent Multicast (PIM) AutoRP messages received Emergency None Alert None Critical None Error None Warning Log None Notice Log None Copyright © 2010, Juniper Networks, Inc.
Page 217 NOTE: For information about interface types and specifiers, see Interface Types and Specifiers in JunosE Command Reference Guide. pimIpv6AutoRPSentLog Description Protocol Independent Multicast (PIM) AutoRP messages sent Emergency None Copyright © 2010, Juniper Networks, Inc.
Page 218 Description of received messages (specify high verbosity for detail) Debug None Filter 1 interface-ip-address—See description of the pimAutoRPRcvdLog interface-ip-address filter for information about this filter Filter 2 router—See description of the pimAutoRPRcvdLog router filter for information about this filter Copyright © 2010, Juniper Networks, Inc.
Page 219 Description PIM IPv6 graceful restart Emergency None Alert None Critical None Error None Warning Log None Notice Log PIM graceful restart complete Info None Debug None Copyright © 2010, Juniper Networks, Inc.
Page 220 [ interface-ipv6-address [ ipv6-address ipv6Address | unnumbered interfaceType interfaceSpecifier ] ] router—Logs events for a specific virtual router virtualRouterName—Name of virtual router for which you want to log events interface-ipv6-address—Logs events for a specific interface on the virtual router Copyright © 2010, Juniper Networks, Inc.
Page 221 Filter 2 router—See description of the pimIpv6HelloRcvdLog router filter for information about this filter pimIpv6PktsRcvdLog Description Protocol Independent Multicast (PIM) nonhello (Register/RegisterStop/JoinPrune/Assert/Graft/GraftAck) messages received Emergency None Copyright © 2010, Juniper Networks, Inc.
Page 222 None Notice Log None Info Short description of the PIM messages sent Debug Complete description of the PIM messages sent Filter 1 interface-ipv6-address—See description of the pimIpv6HelloRcvdLog interface-ipv6-address filter for information about this filter Copyright © 2010, Juniper Networks, Inc.
Page 223 Description Protocol Independent Multicast (PIM) nonhello (Register/RegisterStop/JoinPrune/Assert/Graft/GraftAck) messages sent Emergency None Alert None Critical None Error None Warning Log None Notice Log None Copyright © 2010, Juniper Networks, Inc.
Page 224 Successful addition or removal of peer Debug None Filter None pimsmMvpn Description Multicast VPN events, including default and data MDT creation and deletion Emergency None Alert None Critical None Error Failure to create MDT Warning Log None Copyright © 2010, Juniper Networks, Inc.
Page 225 CAM resource allocation on a line module is exceeded; the particular policy fails to be attached to the interface Filter None policyMgrGeneral Description Policy Manager general information Emergency None Alert None Critical None Error Error storing or restoring policy manager data to and from NVS; resource exhaustion errors Copyright © 2010, Juniper Networks, Inc.
Page 226 None Warning Log None Notice Log None Info Packet trace Debug None Filter None Description Point-to-Point Protocol layer Emergency None Alert None Critical Nonrecoverable error Error Recoverable error Warning Log Resource or configuration problem Copyright © 2010, Juniper Networks, Inc.
Page 227 IWF-Session VSA included in the PADR packets is established and terminated. Filter interface interfaceType interfaceSpecifier interface—Logs PPP events for a specific interface interfaceType—Type of interface for which you want to log PPP events interfaceSpecifier—Location of interface in the appropriate format Copyright © 2010, Juniper Networks, Inc.
Page 228 NOTE: For information about interface types and specifiers, see Interface Types and Specifiers in JunosE Command Reference Guide. pppPacket Description PPP packet capture Emergency None Alert None Copyright © 2010, Juniper Networks, Inc.
Page 229 Specifiers in JunosE Command Reference Guide. pppStateMachine Description PPP state machine trace Emergency None Alert None Critical None Error None Warning Log None Notice Log None Info None Debug State machine trace Filter interface interfaceType interfaceSpecifier Copyright © 2010, Juniper Networks, Inc.
Page 230 Initialize profiles from NVS at startup; dump list of profiles after startup initialization; read or save profile numbering seed to and from NVS; profile manager process creation succeeded; NVS updated; profile lookup succeeded; validating or executing removal of profile Filter None Copyright © 2010, Juniper Networks, Inc.
Page 231: Chapter 16 Q Commands
None Critical None Error Queue memory errors; line module queue errors; queue database synchronization errors Warning Log None Notice Log None Info None Debug None Filter None Description QoS events Emergency None Alert None Copyright © 2010, Juniper Networks, Inc.
Page 232 Critical None Error QoS attachment failures Warning Log None Notice Log None Info Attachment of QoS profiles; modification of QoS profile attachments Debug Dynamic attachment of QoS profiles; QoS profile attach/detach tracing Filter None Copyright © 2010, Juniper Networks, Inc.
Page 233: Chapter 17 R Commands
217 rsvpBfd on page 218 rsvpGeneral on page 218 rsvpGracefulRestart on page 219 rsvpInterface on page 219 rsvpTunnel on page 220 radiusAttributes Description RADIUS user attributes Emergency None Alert None Critical None Copyright © 2010, Juniper Networks, Inc.
Page 234 Authentication or accounting failure due to internal memory allocation failure; memory allocation failure for profile; failed to insert tunnel attribute and tunnel tag table; found unexpected tunnel table Filter None radiusCoAAttributes Description RADIUS CoA attributes Emergency None Copyright © 2010, Juniper Networks, Inc.
Page 235 Warning Log None Notice Log None Info CoA failures resulting from memory allocation failures Debug CoA results received that do not match pending CoA requests Filter None radiusRelayGeneral Description RADIUS Relay Server general Emergency None Copyright © 2010, Juniper Networks, Inc.
Page 236 Acct-Stop and interim accounting requests; IPv6 RADIUS IETF and VSA attributes (Ipv6-NdRa-Prefix [26-129], Ipv6-Virtual-Router [26-45], Ipv6-Local-Interface [26-46], Ipv6-Primary-DNS [26-47], Ipv6-Secondary-DNS [26-48], Framed-IPv6-Route [99], Framed-IPv6-Pool [100], Delegated-Ipv6-Prefix [123]) that are added to Access-Accept (inbound RADIUS requests), Acct-Start, Interim-Acct, and Acct-Stop Copyright © 2010, Juniper Networks, Inc.
Page 237 Ping, traceroute, or nslookup session begin or end; packet receive; duplicate receive Filter None resourceThresholdTrap Description Resource threshold trap log Emergency None Alert None Critical None Error None Warning Log Rising trap Notice Log Falling trap Copyright © 2010, Juniper Networks, Inc.
Page 238 RIP config mode exceed maximum allowable length Warning Log Failed to process a RIP packet due to the current memory limitation Notice Log Enable or disable RIP application Copyright © 2010, Juniper Networks, Inc.
Page 239 Routes sent or received by RIP; if a route is rejected or not sent, gives the reason Filter 1 interface interfaceType interfaceSpecifier interface—Logs PPP events for a specific interface interfaceType—Type of interface for which you want to log events Copyright © 2010, Juniper Networks, Inc.
Page 240 None Debug Add or remove a route to the RIP routing table Filter None routeDownloader Description RADIUS route-download server operation Emergency None Alert None Critical None Error Unable to create application process when configured Copyright © 2010, Juniper Networks, Inc.
Page 241 None Debug None Filter router virtualRouterName router—Logs events for a specific virtual router virtualRouterName—Name of virtual router for which you want to log events rsvpAsyncMgr Description RSVP asynchronous manager events Emergency None Alert None Copyright © 2010, Juniper Networks, Inc.
Page 242 BFD session create failed for IP address Debug Delete BFD; RSVP-TE established session with BFD manager; Creating BFD session for interface; deleting BFD session for interface Filter Router and interface rsvpGeneral Description RSVP general purpose Emergency None Alert None Copyright © 2010, Juniper Networks, Inc.
Page 243 Description RSVP graceful restart Emergency None Alert None Critical None Error None Warning Log None Notice Log RSVP graceful restart complete Info None Debug None Filter None rsvpInterface Description RSVP interface Emergency None Copyright © 2010, Juniper Networks, Inc.
Page 244 Emergency None Alert None Critical Critical operational errors Error Operational errors; resource allocation failures Warning Log Operational failures; fast-reroute triggering Notice Log Less serious operational failures; network changes Info Minor internal errors; timer operations Copyright © 2010, Juniper Networks, Inc.
Page 245 Chapter 17: R Commands Debug Function flows, parameter passing Filter router virtualRouterName router—Logs events for traffic on a specific virtual router virtualRouterName—Name of virtual router Copyright © 2010, Juniper Networks, Inc.
Page 247: Chapter 18 S Commands
233 ssccDetailPm on page 234 ssccDetailSsc on page 234 ssccGeneral on page 235 ssccLacGeneral on page 235 ssh on page 236 stTunnel on page 237 stTunnelEngine on page 237 system on page 238 Copyright © 2010, Juniper Networks, Inc.
Page 248 Warning Log The file to support this command is invalid Notice Log Normal milestones of command completion Info Timing information of show tech-support command Debug Detailed information of show tech-support command progress Filter None Copyright © 2010, Juniper Networks, Inc.
Page 249 Critical None Error Information about detected abnormalities during execution Warning Log Information about exceeded thresholds Notice Log None Info None Debug Information about the code path executed along with values of parameters Filter None Copyright © 2010, Juniper Networks, Inc.
Page 250 Critical None Error Information about detected abnormalities during execution Warning Log Information about exceeded thresholds Notice Log None Info None Debug Information about the code path executed along with values of parameters Filter None Copyright © 2010, Juniper Networks, Inc.
Page 251 Critical None Error Information about detected abnormalities during execution Warning Log Information about exceeded thresholds Notice Log None Info None Debug Information about the code path executed along with values of parameters Filter None Copyright © 2010, Juniper Networks, Inc.
Page 252 Critical None Error Information about detected abnormalities during execution Warning Log Information about exceeded thresholds Notice Log None Info None Debug Information about the code path executed along with values of parameters Filter None Copyright © 2010, Juniper Networks, Inc.
Page 253 Remove or unbind interface failure; unknown or missing lower binding failure Warning Log Attempt to set characteristics with invalid value Notice Log None Info Hardware state change notification Debug None Filter serial interfaceSpecifier serial—Logs SLEP events for a specific serial Cisco-HDLC interface Copyright © 2010, Juniper Networks, Inc.
Page 254 Trap request dropped; trap processing summary statistics Filter None snmpIfMib Description SNMP Interfaces MIB Emergency None Alert None Critical None Error Invalid ifTableLastChange reported by an interface Warning Log Failed to process an interface for ifNumber MIB attribute computation Copyright © 2010, Juniper Networks, Inc.
Page 255 PDUs that leave the system: source and destination IP address, PDU type, snmpVersion, requested, errorStatus, errorIndex, variable count, variable object identifier and data Debug None Filter None snmpSetPduAudit Description SNMP set PDUs Emergency None Alert None Critical None Error None Warning Log None Copyright © 2010, Juniper Networks, Inc.
Page 256 TX Power High Warning; TX Power Low Warning; RX Power High Warning; RX Power Low Warning Notice Log None Info SNMP trap PDUs that the corresponding SNMP agent transmitted Debug None Filter None sonet Description SONET Emergency None Alert None Critical None Error Configuration errors, NVS failures Copyright © 2010, Juniper Networks, Inc.
Page 257 Notice Log Pool expansion Info Init from NV failures; NV upgrade; path update progress; path configuration notification Debug Path update Filter None sonetVT Description SONET virtual tributary Emergency None Alert None Critical None Copyright © 2010, Juniper Networks, Inc.
Page 258 Policy manager function call made; Policy manager attempts to get statistics Filter None ssccDetailSsc Description SDX client (formerly SSCC) detail for SDX interaction Emergency None Alert None Critical None Error More detail for SDX management errors Copyright © 2010, Juniper Networks, Inc.
Page 259 Events (create interface, reports, removals); policy deletions; policy reattachments; CLI events; connection retries Filter None ssccLacGeneral Description L2TP LAC interfaces details for policy and QoS management by the COPS client Emergency None Alert None Critical None Copyright © 2010, Juniper Networks, Inc.
Page 260 MAC failure; user timeout Notice Log AAA user authentication failure; ignored channel request; client connect/disconnect Info Detailed client connection info (per connection attempt) Debug Daemon instance creation/removal; detailed packet info (per packet) Filter None Copyright © 2010, Juniper Networks, Inc.
Page 261 Unexpected and nonrecoverable communication errors Warning Log Unexpected but recoverable events Notice Log Controller up/down and restart up/down events Info Processing of controller up/down and restart up/down events; processing of synchronization events following a cold- or warm-restart Copyright © 2010, Juniper Networks, Inc.
Page 262 (normal operation); line module timing source set failure (not necessarily an error); image protection notification Filter slot slotNumber slot—Logs events for a specific slot slotNumber—Number of slot for which you want to log events Copyright © 2010, Juniper Networks, Inc.
Page 263: Chapter 19 T Commands
TACACS+ server Notice Log Received unexpected data from the TACACS+ host, which will result in authentication failure; either there is no host in NVS, or all attempts to configure a host failed Info None Copyright © 2010, Juniper Networks, Inc.
Page 265 Info None Debug Report all TCP receive and transmit events Filter 1 remote-ip-address ipAddress [ ipAddressMask ] remote-ip-address—Logs events for a remote address ipAddress—Address of remote system for which you want to log messages Copyright © 2010, Juniper Networks, Inc.
Page 266 Warning Log None Notice Log None Info None Debug Stopped listening on a specified router Filter None telnetClient Description Telnet client log Emergency None Alert None Critical None Error None Copyright © 2010, Juniper Networks, Inc.
Page 267 Info Initiating communication with remote host; discarded messages Debug TFTP responses received from incorrect source port on remote host Filter None trackerEvents Description Tracker event propagation Emergency None Alert None Critical None Error None Copyright © 2010, Juniper Networks, Inc.
Page 268 Indicates if there is a memory shortage for accommodating new clients Debug Provides debug information for the tracker component Filter None Description Tunnel server manager Emergency None Alert None Critical Number of interfaces in use is critically close to maximum Error Memory exhaustion errors Copyright © 2010, Juniper Networks, Inc.
Page 269 Notice Log Nonvolatile storage allocation problems; memory pool expansion Info Resource-restriction based denial of service; line module up or down transitions Debug Program debugging information including function call tracing Filter None Copyright © 2010, Juniper Networks, Inc.
Page 271: Chapter 20 U Commands
Filter 2 router virtualRouterName [ remote-ip-address ipAddress [ ipAddressMask ] ] router—Logs events on a specific virtual router virtualRouterName—Name of virtual router for which you want to log events remote-ip-address—Logs events for a remote address Copyright © 2010, Juniper Networks, Inc.
Page 272 Filter 2 [ remote-ipv6-address ipv6Address ] remote-ipv6-address—Logs events for packets arriving from or going to a specified IPv6 address ipv6Address—IPv6 address of remote system for which you want to log messages Copyright © 2010, Juniper Networks, Inc.
Page 273: Chapter 21 V Commands
Management get, set, create, and remove Filter interface interfaceType interfaceSpecifier [ vrrpIdentifier ] interface—Logs events on a specific interface interfaceType—Type of interface for which you want to log events interfaceSpecifier—Location of interface in the appropriate format Copyright © 2010, Juniper Networks, Inc.
Page 274 Filter None Description VLAN subinterface manager Emergency None Alert None Critical Unable to find VLAN major interface for agent-circuit-id–based VLAN Error Truncating agent-circuit-id string Warning Log Creation failure Notice Log Out of pool space Copyright © 2010, Juniper Networks, Inc.
Page 275 Filter None vsmEngine Description VLAN subinterface manager engine Emergency None Alert None Critical None Error None Warning Log None Notice Log None Info None Debug Recoverable out-of-sync conditions after high availability switchover Filter None Copyright © 2010, Juniper Networks, Inc.
Page 283 See technical support system event logs individual logs............10, 14 severity..................3 system-wide logs.............10, 14 user-defined classification..........15 verbosity................3 viewing logs...............17 technical support contacting JTAC............xxiii text and syntax conventions..........xxii Copyright © 2010, Juniper Networks, Inc.

This manual is also suitable for:

Junose 11.2

Juniper JUNOSE SOFTWARE 11.2.X - SYSTEM EVENT LOGGING REFERENCE GUIDE 6-29-2010 Reference Manual

Chapter 1 System Logging Overview

Chapter 2 Event Categories

Chapter 4 B Commands

Chapter 5 C Commands

Chapter 6 D Commands

Chapter 7 E Commands

Chapter 8 F Commands

Chapter 9 G and H Commands

Chapter 10 I Commands

Chapter 11 L Commands

Chapter 12 M Commands

Chapter 13 N Commands

Chapter 14 O Commands

Chapter 15 P Commands

Chapter 16 Q Commands

Chapter 17 R Commands

Chapter 18 S Commands

Chapter 19 T Commands

Chapter 20 U Commands

Chapter 21 V Commands

Chapter 3 Acommands

Quick Links

Need help?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Juniper JUNOSE SOFTWARE 11.2.X - SYSTEM EVENT LOGGING REFERENCE GUIDE 6-29-2010

Summary of Contents for Juniper JUNOSE SOFTWARE 11.2.X - SYSTEM EVENT LOGGING REFERENCE GUIDE 6-29-2010

This manual is also suitable for:

Table of Contents