Override C2 Byte - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide N to Z

override c2 byte

Syntax
Release Information
Description
Mode
122
[ no ] override c2 byte
Command introduced before JunosE Release 7.1.0.
Overrides the default value of the Path Signal Label (C2) byte for SONET and SDH
interfaces. The no version restores the default setting.
Controller Configuration
Copyright © 2010, Juniper Networks, Inc.