Neighbor Shutdown - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide N to Z

neighbor shutdown

Syntax
Release Information
Description
Options
Mode
62
[ no | default ] neighbor { ipAddress | ipv6Address | peerGroupName } shutdown
Command introduced before JunosE Release 7.1.0.
ipv6Address variable added in JunosE Release 8.0.0.
Shuts down the specified neighbor or peer group without removing the neighbor or peer
group configuration. The no version reenables a neighbor or peer group that was previously
shut down. The default version removes the explicit configuration from the peer or peer
group and reestablishes inheritance of the feature configuration.
ipAddress—IP address of BGP neighbor
ipv6Address—IPv6 address of BGP neighbor
peerGroupName—Name of a BGP peer group. If you specify a BGP peer group by using
the peerGroupName argument, all the members of the peer group inherit the
characteristic configured with this command, unless it is overridden for a specific peer.
Address Family Configuration, Router Configuration
Copyright © 2010, Juniper Networks, Inc.