Table of Contents
Advertisement
show bridge interface
Syntax
Release Information
Description
Options
Copyright © 2010, Juniper Networks, Inc.
To display information about a specified network interface that belongs to a bridge group
or to a VPLS instance:
show bridge interface interfaceType interfaceSpecifier [ delta ] [ filter ]
To display information about all interfaces that belong to a bridge group or to a VPLS
instance, including the VPLS virtual core interface for a VPLS instance:
show bridge { bridgeGroupName | vplsName } interface [ brief | delta ] [ filter ]
Command introduced before JunosE Release 7.1.0.
vplsName variable added in JunosE Release 7.1.0.
Displays configuration, statistics, and status information for a specified network interface
that belongs to a bridge group or to a VPLS instance, or for all interfaces that belong to
a bridge group or to a VPLS instance.
When you use the show bridge interface command to display information for all interfaces
in a VPLS instance, the router displays information about the network interfaces that
belong to the VPLS instance and about the VPLS virtual core interface, which represents
all the MPLS tunnels from the router to the remote VPLS edge (VE) devices.
interfaceType—One of the following interface types listed in Interface Types and
Specifiers on page 5
atm
fastEthernet
gigabitEthernet
tenGigabitEthernet
interfaceSpecifier—Particular interface; format varies according to interface type; see
Interface Types and Specifiers on page 5
delta—Displays baselined statistics
filter—See Filtering show Commands on page 4
bridgeGroupName—Name of a bridge group specified with the bridge command
vplsName—Name of a VPLS instance created with the bridge vpls
transport-virtual-router command
brief—Displays the type, specifier, associated port number, and operational status for
each interface
delta—Displays baselined statistics
filter—See Filtering show Commands on page 4
Chapter 7: S Commands
611
Advertisement
Table of Contents
