Pppoe Motm - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

pppoe motm

Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
pppoe motm string
no pppoe motm
Command introduced before JunosE Release 7.1.0.
Causes the PPPoE application to send a PADM message of the minute message. The no
version disables the message.
The recipient of the message is determined by the mode from which the command is
issued. From Privileged Exec mode the message is sent to all PPPoE clients connected
to the router; from Interface Configuration mode the PADM message is sent to the client
as it is configured (if connected); and from Profile Configuration mode the message is
sent to the new client created when the profile is dynamically attached to an IP interface.
The MOTM string is passed with no changes.
string—Message sent
Interface Configuration, Privileged Exec, Profile Configuration
Chapter 4: P Commands
249