Ppp Multilink Multiclass Traffic-Class - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide N to Z

ppp multilink multiclass traffic-class

Syntax
Release Information
Description
Options
Mode
Related
Documentation
234
[ no ] ppp multilink multiclass traffic-class best-effort [ trafficClassName ]*
Command introduced in JunosE Release 11.1.0.
Configures mapping of QoS traffic classes to multilink classes. The no version deletes
the mapping of QoS traffic classes to multilink classes.
best-effort—Specifies best-effort as the default traffic class for the router. The
best-effort traffic class forwards as many packets as possible in as reasonable a time
as possible. The best-effort traffic class is mapped to multilink class 0 by default. You
must specify the best-effort traffic class in the command or the command fails.
trafficClassName—Name of a QoS traffic class. You can map up to eight traffic classes
to multilink classes. The order of the traffic class names specified determines the
multilink class number which is used for the traffic class; for example, trafficClassName1
corresponds to multilink class 1, trafficClassName2 corresponds to multilink class 2,
and so on.
*—Indicates that one or more parameters can be repeated multiple times in a list in
the command line
Interface Configuration, Profile Configuration, Subinterface Configuration
Configuring Multiclass MLPPP
Configuring Traffic Classes on Multiclass MLPPP Interfaces
Copyright © 2010, Juniper Networks, Inc.