Set Ip Interface-Profile - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

set ip interface-profile

Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
set ip interface-profile profileName
no set ip interface-profile
Command introduced before JunosE Release 7.1.0.
Specifies a dynamic IP interface profile that is used in the route map. The no version
removes the interface profile from the route map.
profileName—Name of the dynamic profile
Route Map Configuration
Chapter 7: S Commands
495