secure ip policy-list
Syntax
Release Information
Description
Options
Mode
Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
[ no ] secure ip policy-list policyName
Command introduced before JunosE Release 7.1.0.
Creates or modifies a secure IP policy list. Enters Policy List Configuration mode, enabling
you to specify the parameters of the secure IP policy list. If you enter Policy List
Configuration mode and then type exit without specifying any parameters, the router
creates a policy list with a mirror disable rule. Attaching this policy list to an interface
results in no packet mirroring. The no version removes the specified policy list.
policyName—Name of the secure IP policy list
Global Configuration
Configuring CLI-Based Mirroring
Chapter 7: S Commands
441