Shared-Shaping-Constituent - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

shared-shaping-constituent

Syntax
Release Information
Description
Options
Mode
Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
shared-shaping-constituent [ priority [ priorityValue ] | weight [ weightValue ] ]
no shared-shaping-constituent
Command introduced before JunosE Release 7.1.0.
Sets the attributes of implicit and explicit shared-shaping constituents and specifies
explicit shared-shaping constituents. Constituents default to priority with a priority value
of 8. Priority constituents are ordered before weighted constituents. The no version
deletes the attributes or explicit constituent.
priorityValue—Value, in the range 1–8, that specifies the order in which the constituent
can claim bandwidth from among all priority constituents; a lower value correlates to
a higher claim; 8 is the default value
weightValue—Value, in the range 1–31, that specifies the order in which the constituent
can claim bandwidth from among all weighted constituents; a lower value correlates
to a higher claim; 8 is the default value
Scheduler Profile Configuration
Configuring Implicit Constituents for Simple or Compound Shared Shaping
Configuring Explicit Constituents for Simple or Compound Shared Shaping
Chapter 7: S Commands
517