Table of Contents
Advertisement
rtr reaction-configuration operation-failure
Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
rtr reaction-configuration rtrIndex operation-failure [ operationFailureValue ]
Command introduced before JunosE Release 7.1.0.
Enables operation-failure reaction. When the type of RTR entry is echo, you can also
configure a value that triggers the operation-failure trap. When the type of RTR entry is
pathEcho, you cannot configure the operation-failure trap. There is no no version. See
the no rtr reaction-configuration command.
rtrIndex—Number of the operation to be configured, in the range 1–4294967295
operationFailureValue—Number, in the range 0–15; default value is 1
Global Configuration
Chapter 6: R Commands
417
Advertisement
Table of Contents
