Path Shutdown - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide N to Z

path shutdown

Syntax
Release Information
Description
Options
Mode
180
For channelized OCx/STMx interfaces:
[ no ] path pathChannel shutdown
For unchannelized OCx/STMx interfaces:
[ no ] path shutdown
Command introduced before JunosE Release 7.1.0.
Disables a path on channelized and unchannelized SONET/SDH interfaces. On
channelized interfaces, you must specify the path channel number. By default, paths are
enabled. The no version restarts the path.
pathChannel—Number, in the range 1–2147483648, that identifies the path on a
channelized interface
Controller Configuration
Copyright © 2010, Juniper Networks, Inc.