Table of Contents
Advertisement
JunosE 11.3.x Command Reference Guide N to Z
redundant-port
Syntax
Release Information
Description
Options
Mode
376
To specify a member interface with optional failover timeout and packet sampling
settings:
[ no ] redundant-port interfaceType interfaceSpecifier [ [ failover timeout
failoverTime ] [ packet-sampling [ delay delayTime ] ] ]
To specify a member interface with optional auto-reversion, transmitter, and failover
timeout settings:
[ no ] redundant-port interfaceType interfaceSpecifier [ [ auto-revert ] [ transmitter { on
| off } ] [ failover timeout failoverTime ] ]
Command introduced in JunosE Release 8.0.0.
Specifies a member link of a LAG bundle as redundant. The no version disables the
redundant status of the member link or disables the specified redundancy setting for the
member link.
interfaceType—Interface type; see Interface Types and Specifiers on page 5
interfaceSpecifier—Particular interface; format varies according to interface type; see
Interface Types and Specifiers on page 5
failoverTime—Time between the current link event leading to failover or reversion and
the previous link failover or reversion, in the range 100-10000 milliseconds (ms). The
default value is 1000 milliseconds.
packet-sampling—Enables packet sampling to determine a failed port. By default,
packet sampling is disabled.
delayTime—Minimum time difference between redundant and active port samples, in
the range 100–10000 milliseconds (ms). The default value is 0 millisecond.
auto-revert—Specifies that the failed port automatically resumes as active. By default,
auto revert is disabled.
on—Specifies the transmitter is enabled when port is in redundant mode
off—Specifies the transmitter is disabled when port is in redundant mode
Global Configuration
Copyright © 2010, Juniper Networks, Inc.
Advertisement
Table of Contents
