Priority Rate - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

priority rate

Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
priority priorityValue rate rateValue
no priority priorityValue rate
Command introduced in JunosE Release 8.1.0.
Sets the rate for each priority. The no version returns to the default value.
priorityValue—Hi-Green-IC, Hi-Green-SC, Hi-Yellow-IC, Hi-Yellow-SC, Lo-Green-IC,
Lo-Green-SC, Lo-Yellow-IC, Lo-Yellow-SC
rateValue—Packets per second, in the range 64–65535
DoS Protection Group Configuration
Chapter 4: P Commands
267