Neighbor Graceful-Restart - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide N to Z

neighbor graceful-restart

Syntax
Release Information
Description
Options
Mode
38
[ no | default ] neighbor { ipAddress | ipv6Address | peerGroupName } graceful-restart
Command introduced before JunosE Release 7.1.0.
ipv6Address variable added in JunosE Release 8.0.0.
Enables the BGP graceful restart capability for the peer or peer group, which enables
BGP to maintain its forwarding state during a peer restart, avoiding network-wide route
flaps and interruptions in traffic forwarding. Graceful restart is disabled by default. The
no version disables the graceful restart capability. The default version removes the
explicit configuration from the peer or peer group and reestablishes inheritance of the
feature configuration.
ipAddress—IP address of BGP neighbor
ipv6Address—IPv6 address of BGP neighbor
peerGroupName—Name of a BGP peer group. If you specify a BGP peer group by using
the peerGroupName argument, all the members of the peer group inherit the
characteristic configured with this command, unless it is overridden for a specific peer.
Address Family Configuration, Router Configuration
Copyright © 2010, Juniper Networks, Inc.