Operations-Per-Hop - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

operations-per-hop

Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
operations-per-hop operationsHopValue
no operations-per-hop
Command introduced before JunosE Release 7.1.0.
Configures the number of operations sent to a designated hop before the TTL value is
increased. This option applies only to the pathEcho type. The no version restores the
default value, 3.
operationsHopValue—Number of operations per hop; default value is 3
RTR Configuration
Chapter 3: O Commands
113