Restricted - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide N to Z

restricted

Syntax
Release Information
Description
Options
Mode
Related
Documentation
394
[ no ] restricted interface restrictedInterfaceType interfaceSpecifier [ atmVpi | s-vlanIdValue
]
Command introduced in JunosE Release 9.2.0.
Configures an interface superset as restricted to a particular ATM-VPI or S-VLAN ID. The
no version deletes the restriction for the interface superset.
restrictedInterfaceType—One of the following restricted interface types: atm-vp,
fastEthernet, gigabitEthernet, svlan, tenGigabitEthernet
interfaceSpecifier—Particular interface; format varies according to interface type; see
"Interface Types and Specifiers" on page 5
atmVpi—Virtual path identifier of this PVC; number in the range 0–255
s-vlanIdValue—S-VLAN ID number in the range 0–4095
QoS Interface Superset Configuration
Configuring Interface Supersets for QoS
Copyright © 2010, Juniper Networks, Inc.