show log data
Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
show log data [ nv-file | category eventCategory ]
[ severity { severityValue | severityNumber } ] [ delta ] [ filter ]
Command introduced before JunosE Release 7.1.0.
Displays the system log.
nv-file—Displays the nv-file log
eventCategory—Log category to display; refer to the CLI online help for available options
severity—Minimum severity of the log messages displayed; described either by a
descriptive term—severityValue—or by a corresponding number—severityNumber—in
the range 0–7; the lower the number, the higher the priority:
emergency or 0—System unusable
alert or 1—Immediate action needed
critical or 2—Critical condition exists
error or 3—Error condition
warning or 4—Warning condition
notice or 5—Normal but significant condition
info or 6—Informational message
debug or 7—Debug message
delta—Limits the display to events that occurred after the baseline
filter—See Filtering show Commands on page 4
Privileged Exec, User Exec
Chapter 7: S Commands
1003